Operation Manual

588| Effects for the Sounds
e High Damp [%] 0…100 Sets the damping amount in the high range
Low Damp [%] 0…100 Sets the damping amount in the low range
f Input Level
Dmod [%]
–100…+100 Sets the modulation amount of the input level
Src Off…Tempo Selects the modulation source for the input
level
g Wet/Dry Dry, 1:99…99:1,
Wet
Balance between the wet and dry signal
Src Off…Tempo See DMS (Dynamic Modulation Source)
Amt –100…+100 Amount of modulation source
a: BPM
b: Rhythm Pattern
With the tempo specified by the “BPM” parameter (or the MIDI Clock tempo
if “BPM” is set to MIDI), the length of one beat equals the feedback delay
time, and the interval between taps becomes equal. Selecting a rhythm pat-
tern will automatically turn the tap outputs on and off. When “BPM” is set to
MIDI, the lower limit of the “BPM” is 44.
L/C/R BPM Delay
The L/C/R delay enables you to match the delay time with the song tempo.
You can also synchronize the delay time with the arpeggiator or sequencer.
If you program the tempo before performance, you can achieve a delay ef-
fect that synchronizes with the song in real-time. Delay time is set by notes.
C Delay
Left
Right
Feedback
Spread
FX Amt
FX Amt
FX Amt = 100: Mono In - Stereo Out / FX Amt = 0: Stereo In -Stereo Out
Input Level D-mod
High Damp
Low Damp
L Delay
Input Level D-mod
+
Level
Level
Level
Tempo
BPM
BPM
Base Note x Times
Base Note x Times
Base Note x Times
R Delay