Operation Manual

580| Effects for the Sounds
St. Mod Delay (Stereo Modulation Delay)
This stereo delay uses an LFO to sweep the delay time. The pitch also varies,
creating a delay sound which swells and shimmers. You can also control the
delay time using a modulation source.
Left
Right
Feedback
LFO Phase
FX Amt
FX Amt
Stereo In - Stereo Out
LFO: Tri / Sine
Modulation Mode
D-mod
LFO
D
-mod
Delay
Delay
L/R: +/+ +/–
LFO Shape
Response
LFO Sync
a Modulation Mode LFO, D-mod Switches between LFO modulation control
and modulation source control
b D-mod Modulation L/R:+/+,
L/R:+/–
Reversed L/R control by modulation source
Src Off…Tempo Selects the modulation source that con-
trols delay time
Response 0…30 Sets the rate of response to the modula-
tion source
c LFO Waveform Triangle, Sine Selects the LFO Waveform
LFO Shape –100…+100 Changes the curvature of the LFO
Waveform
d LFO Sync Off, On Switches LFO reset off/on
Src Off…Tempo Selects the modulation source that resets
the LFO
e LFO Frequency [Hz] 0.02…20.00 Sets the speed of the LFO
f MIDI Sync Off, On When this is on, the LFO speed is set by
BPM, Base Note, and Times, instead of
Frequency
BPM MIDI,
40.00…
300.00
MIDI syncs to the system tempo; 40–300
sets the tempo manually for this individual
effect
Base Note
…
Selects the type of notes that specify the
LFO speed
Times x1…x32 Sets the number of notes that specify the
LFO speed