Operation Manual

Editing the Voice effects |553
Writing a Voice Preset
Voice Presets can store the Voice effects settings for instant recall. The li-
brary is where you organize them by type.
Note: Changes can be saved onto User Voice Presets. They cannot normally be saved
onto Factory Voice Presets.
Writing a Voice Preset
Open the Write Voice Preset dialog from the control panel
▪ While in any mode, keep the MIC/VOICE > PRESET button pressed for about
one second.
Open the Write Voice Preset dialog from the display
▪ While in any of the Voice Preset pages, choose the Write Voice Preset com-
mand from the page menu.
Voice Preset name
Voice Preset
location
Touch to open the
Voice Preset Select
window
Write over the same Voice Preset
▪ If you want to overwrite the current Voice Preset, just touch the OK button.
Write to a different Voice Preset location
1 If you want to save onto a different location, touch the Select button and
open the Voice Preset Select window. Choose a location as if you were
choosing a Voice Preset. Blank locations are shown as a series of dashes
(‘–––’).
2 When back at the Write Voice Preset dialog, you may change the name of
the Voice Preset. Touch the Text Edit (
) icon to open the virtual key-
board and edit the name.