Operation Manual

550| Audio In/Out and the Voice Processor
Use the Quantize Left/Right parameters, when the Source is set to MIDI,
to divide the Tempo into even (e.g. 1/4 or quarter notes) or syncopated sub-
beats (e.g. 1/4 triplets, 1/4 dotted notes) for the left and right delays.
Use the Time L/R parameters to display the exact delay time and to allow
editing with all Source settings. You may set from 0 to 2500ms (2.5 seconds)
of delay for the left and right delay lines.
Use the Feedback L/R parameters to re-introduces a portion of the audio
output signal of the Delay block back to the input to add echo repeats.
Use the Hi Cut EQ / Low Cut EQ parameters to add steep highpass (Low Cut)
and low pass (Hi Cut) filters to control the bandwidth of the delays. Applying
these filters to the delays can create the feeling of space while not obscuring
the main vocal signal.
Use the Duck Amount parameter to set how much attenuation (gain reduc-
tion) is applied to the delayed signal when a vocal is present. For ducking to
not be too obvious, a slight reduction of -6 dB is best. The Ducking can also
be turned Off with this parameter.
Mixing in the lead voice
Use the Lead Level parameter to adjust the level of the lead voice mixed with
the effect.