Operation Manual

Editing the Voice effects |549
Editing the Delay effect
While in the Voice Preset > Delay page, you can program the delay effect.
The delay effect is a configurable echo. You can control how far apart the
echoes occur (Delay Time), and whether the echoes fade out quickly or slow-
ly or build on themselves. In addition, there are filtering and stereo controls
that allow you to create many popular delay sounds.
Delays can be typically be categorized into the two listed categories below:
Short Delays: Initial reflections, Slaps
Long Delays (max stereo delay is 2500 ms or 2.5 sec.): Monotaps, Stereotaps,
Syncopated taps, Ping-pongs (delays travelling from left to right).
Choosing the Delay set
▪ Use the Set pop-up menu to choose settings for the Delay block.
Adjusting the level
▪ Use the Level parameter to adjust the level for the Delay effect.
Editing the Delay parameters
▪ Use the Source parameter to specify which of the two methods you want to
use to set delay times.
Source Meaning
Time This allows you to set the exact delay time for the left and right delay
lines manually with the Time L and Time R controls.
MIDI The unit can be set to derive its delay times from incoming MIDI clock
signal.