Operation Manual

Editing the Voice effects |535
Mixing the lead voice and the effects
While in the Voice Preset > FX Mixer page, you can set the master level of
the effects, and internally route the effects.
▪ Use the Level control to adjust the level of each effect block inside the Voice
Preset.
▪ Use the Del/Rev > Level control to adjust the level of the Delay and Reverb
blocks. This corresponds to the DELAY/REVERB knob in the MIC/VOICE sec-
tion of the control panel. This control is not memorized in the Voice Preset.
▪ Use the Lead to Mod/Delay/Rev controls to adjust the level of the lead voice
going into the corresponding effect.
▪ Use the Harm/D to Mod/Delay/Rev controls to adjust the level of the har-
mony/double voices going into the corresponding effect.
▪ Use the Mod to Delay control to adjust the level of the μMod effect going
into the Delay.
▪ Use the Delay to Rev control to adjust the level of the Delay effect going into
the Reverb.