Operation Manual

Connecting the audio inputs |515
Turning the microphone on and adjusting the volume
The microphone can be quickly turned on or off, and its volume in the mix
adjusted, right from the control panel. Please note that, for safety reasons,
the input is always switched off when turning the instrument on.
1 Use the MIC button in the MIC/VOICE section in the control panel to turn the
microphone on (or off).
2 Adjust the microphone volume by using the MIC VOLUME knob in the MIC/
VOICE section.
You can see the volume of the Mic/In channel in the Main page of the Style
Play or Song Play mode. Be sure it is not too low or muted.
Start the automatic accompaniment or a Song to balance your voice against
the Sounds.