Operation Manual

512| Audio In/Out and the Voice Processor
Connecting a microphone
Connecting the microphone
Use the MIC INPUT connector to connect a microphone. This is a combo
connector, featuring an XLR and a 1/4” jack on the same connector. Use the
balanced XLR jack to connect a condenser microphone, or the 1/4” jack to
connect a dynamic microphone.
Enabling the microphone input
By default, the microphone input is enabled. In case it isn’t, activate it.
▪ Go to the Global > Audio & Video > Audio In page, and be sure the Audio In
parameter is set to Mic.
When the microphone input is enabled, it is also sent to the internal MP3
recorder.