Operation Manual

500| Audio In/Out and the Voice Processor
Choosing the audio outputs for the
microphone and line audio inputs
You can send the signal entering the AUDIO INPUTS to the main outputs,
or to the auxiliary sub-ouputs. By default, the main LEFT and RIGHT audio
outputs are selected.
▪ Go to the Global > Audio & Video > Audio In page, and use the Audio Out
parameter to choose the audio output pairs.
Audio Out Meaning
Left+Right Main LEFT and RIGHT outputs
Out1+2 Separate 1 and 2 sub-outputs
Sending the microphone or line audio input to the PaAS
To send the desired audio input signal to the PaAS do the following:
▪ Use the Audio In parameter to select the audio input.
▪ Use the Audio Out parameter to send the signal to the main Left+Right out-
puts.