Operation Manual

Editing the Styles and Pads |293
4 Touch the event to be edited, and edit it.
Measure/Position
Type
Value 1 Value 2 Duration/Length
▪ Select the M (Measure), and use the VALUE controls to change event’s posi-
tion.
▪ Select the Type parameter, and use the VALUE to change the event type.
▪ Select the Value 1 and Value 2 parameters, and use the VALUE controls to
edit them. In case of numeric values, you can also touch them twice to open
the numeric keypad.
▪ If a Note event is selected, select the D (Duration/Length) parameter, and
use VALUE controls to change the event’s length.
Jump to a different measure
1 Touch the Go Meas. button to go to a different measure. The Go To Measure
dialog will appear.
2 Enter a target measure and touch OK to confirm The first event available in
the target measure will be selected.
Insert events
▪ Touch the Insert button to insert an event at the current Position (M). A
Note event with default values will be inserted.
Delete events
▪ Select an event, then touch the Delete button to delete it.
Edit other tracks
▪ When editing is complete, select a different track to edit.
Exit Event Edit
▪ When finished editing the selected Chord Variation, press the EXIT button to
go back to one of the Style Record > Record pages, then select a different
Chord Variation to edit.