Operation Manual

The Chord Sequencer |225
ment off. If the sequence is locked, it will not change when choosing a differ-
ent Style or SongBook Entry.
Recording a Chord Sequence while the Accompaniment is not playing
1 Press the CHORD SEQUENCER > RECORD (
) buttons to enter record-
pending mode.
While in this mode, you will see the red Chord Record icon flashing in the
display.
2 Play a chord, then start the automatic accompaniment in one of these ways:
▪ Press the START/STOP button.
▪ If the SYNCHRO START indicator is turned on, the accompaniment will start
as soon as you play a chord.
The red Chord Record icon will continue flashing in the display.
3 Record your Chord Sequence.
4 When the Chord Sequence is done, press the CHORD SEQUENCER > RECORD
(
) buttons together again to stop recording.
The red Chord Record icon will disappear from the display.
The Chord Sequence will remain in memory until you record a new Chord
Sequence, choose a different Style or SongBook Entry, or you turn the in-
strument off. If the sequence is locked, it will not change when choosing a
different Style or SongBook Entry.