Operation Manual

Advanced editing of the Sound sets |185
Rotary
parameters
Meaning
Rotor On/Brake Touch this button to start or stop the rotating speaker.
Speed Slow/Fast Touch this button to switch the rotating speaker’s speed (from slow to
fast, or vice-versa).
Changing the Tone/Noise settings
Go to the Tone/Noise page
▪ Touch the Tone/Noise tab to show the Tone/Noise page.
Program the Tone parameter
Tone is the waveshape of the drawbars, producing the raw timbre.
Tone option Meaning
Mellow A mellow-sounding wave.
Hard A harder-sounding wave.
Program the Leakage parameter
▪ Increase Leakage from adjacent tonewheels, to make the sound richer.
Program the Key On and Key Off parameters
▪ Use the Key On and Key Off parameters, to add the noise of keypress or key
release.