User's Manual

24
Easy program editing
You can edit the main parameters besides those of the Operators in the HOME/ALGO page.
1.
Press the (ALGO) button to display the HOME/ALGO
page.
2.
Use the DATA ENTRY A–F knobs to change the values for
the parameters shown on the display.
ALGO: Select the algorithm that determines the structure
for Operators 1–6 from the presets and user algorithm.
ATK: Sets the attack time (how quickly the note starts) for
all Operators.
DECAY: Sets the decay/release time (how quickly the note
fades out) for all Operators.
FX1–3: Although the way this works depends on the eect
type that is set, this mainly changes the depth of the eect.
Randomized editing
is sets the current program’s parameters in the selected scope to random values. Use this to nd
new inspiration when you are creating sounds.
1.
Press the button to display the Randomize page.
2.
Select the scope of parameters to randomize.
Change the “SCOPE” parameter with the DATA ENTRY A knob. “PROGRAM” is selected by
default, and all parameters of the program will be set randomly.
Set how the randomization will be done with the “TYPE” parameter.
RND: Changes the selected range of parameters by randomly creating values for each.
SHFFL: Randomly shues (exchanges) the values of the selected range of parameters.
NOISE: Adds a random noise value to the selected range of parameters.
Use “AMT” to adjust the randomization strength.
Currently
selected
algorithm
D knob E knob F knob
A knob B knob C knob