User's Manual
Table Of Contents
- Table of Contents
- Introduction
- Panel description and functions
- Operation Guide
- Parameter Guide
- Appendix
17
Operation Guide
1. Turning the power on/o
Turning the opsix On
Make sure that both the opsix and any amplication devices such as powered monitor speakers are
turned o, and turn the volume of all devices all the way down.
1.
Press the rear-panel (power) button. Once the “opsix” logo appears in the display, release the
(power) button.
2.
Turn on any amplication devices such as powered monitor speakers, and then adjust their
volume. Adjust the opsix’s volume using the VOLUME knob.
Turning the opsix O
1.
Lower the volume of your powered monitors or other amplication devices, and turn them o.
2.
Press the opsix (power) button until the display shows “Shutting Down,” and then release the
(power) button.