User's Manual

Combination mode
404
For instance, you can save an Effect Preset while
working on a particular Combination, and then later
use the same Effect Preset in a different Program,
Combination, or Song.
P00: Initial Set: These are the default settings that are
recalled when you select an effect type in the Insert FX
page. You can’t save your own settings here.
P01…P15: These contain preset data that Korg plans to
provide in the future. We recommend that you store
your settings in U00–U15.
U00…U15: These are areas in which you can store your
own settings.
---------------: This shows that no Effect Preset has been
selected. You’ll see this if you’ve just selected an effect,
written a Combination, or selected a new
Combination. Selecting this setting from the menu will
not have any effect.
Note: Combinations save the effects parameter
settings, but they don’t save the number of the selected
Effect Preset. If you select an Effect Preset, and then
save the Combination, the Effect Preset setting will
revert to “--------------.”
For more details, see “Using Effect Presets” on
page 131.
MFX1 Parameters
Here you can set the effect parameters of the insert
effect you chose in the P9–Routing page.
For details on the master effects, please see the “Effect
Guide” on page 727.
▼ 9–2: Page Menu Commands
The number before each command shows its ENTER +
number-key shortcut. For more information on these
shortcuts, see “ENTER + 0-9: shortcuts for menu
commands” on page 138.
• 0: Write Combination. For more information, see
“Write Combination” on page 405.
• 1: Exclusive Solo. For more information, see
“Exclusive Solo” on page 138.
• 2: Copy MFX/TFX. For more information, see
“Copy MFX/TFX” on page 153.
• 3: Swap MFX/TFX. For more information, see
“Swap MFX/TFX” on page 154.
• 4: Write FX Preset. For more information, see
“Write FX Preset” on page 154.
9–3: MFX2
9–4: TFX1
9–5: TFX2
These pages let you edit the parameters of Master
Effect 2 and Total Effects 1 and 2. To select different
effects types, use the P9– Routing page.
The parameters of MFX2, TFX1, and TFX2 are the same
as for MFX1. For more information, please see “9–2:
MFX1” on page 403.