User's Manual
Table Of Contents
- A few words from Greg Mackie.
- Selecting channels for a Mute Group.
- MAIN MIX (L/R) fader.
- Group Master Section.
- BREAK button/indicator
- MONITOR section
- STEREO IN knob
- Meter section.
- FX Master Section.
- Talkback.
- A better way.
- A traditional Monitor Mix.
- Musician's Phones.
- Aux Master AFL buttons and indicator.
- Aux Master.
- Master Control Section
- Further reading about mixing.
- A few more tips on equalization.
- MID EQ (stereo channels)
- Source Mic / Line (stereo channels).
- PFL switch / indicator
- Same as Mono Channels
- Different than
- Channel fader
- Bus Assign switches
- —20 (Signal present) LED.
- Mute button/ indicator.
- Pan.
- FX Send.
- Aux PRE Switch.
- Aux Sends
- EQ (Equalization), Mono Channels
- Comp (Compressor) and indicator.
- Gain Control.
- Mono Channel Strips.
- Channel 25-26 (or Channels 17-18) and Phones
- Musician Phones (AUX OUT 3 OR 4 + L/R INJECT)
- Aux Out.
- Group Out (sub buses).
- Monitor Out.
- Main Out.
- Talkback input.
- Foot Switch input.
- USB Out
- USB In
- USB input / output.
- Stereo input channels.
- Mono input channels.
- Power input connector
- POWER switch
- Power supply section
- Why do we start with the back of the mixer?
- How the band is set up on the mixer.
- The "pusha-bunch-'0' buttons" approach to creating a mute group.
- Un-doing the "pusha-bunch-'0' buttons" approach to creating a mute group.
- Program a Mute Group…
- Rack mounting (MW-2408 only)
- Settings that can be saved
- More on Factory Reset (restoring the factory default settings).
- Other GLOBAL options.
- Recalling a Global Scene
- Saving a Global Scene
- Global menu (scene memory, settings, initialization).
- Locking the state of the feedback suppressor
- Feedback Suppressor: Seting routing options.
- Recalling an Equalizer Setting (continued)
- Recalling an Equalizer Setting.
- Saving Equalizer settings.
- Adjusting (Narrow Mode) Continued
- Adjusting EQ Narrow Mode EQ (31 /9-band).
- Adjusting 9-band EQ (Wide Mode).
- Selecting Narrow or Wide 9-band equalization.
- Recalling a Dynamics preset.
- Saving a Dynamics setting.
- FEEDBACK SUPPRESSOR
- EQUALIZATION
- SoundLink Signal Processing*
- Gee, they don't sound like effects!
- Recalling a DFX preset.
- Saving a Digital Effects setting.
- Using the TAP button to set the delay time.
- Editing an effect
- Applying a Digital Effect
- Selecting the DFX type
- Digital Effects (DFX).
- Saving and Recalling Mute Groups.
- Combining Hard Mutes and Mute Groups.
- Adding to or subtracting channels from a Mute Group.
- Creating a Mute Group.
- "Hard muting".
- OL (Overload) LED.
Hook-up/Back panel Analog Controls Digital Controls
HYBRID ANALOG/DIGITAL MIXER
GLOBAL
SETUPANTI-FEED OVERVIEW ANALYZER
SELECTTAP
RESET
:
REV HALLP01 -02
:
REV ROOMP03-04
:
REV VOCALP05-06
:
REV STAGEP07-08
:
REV PLATEP09- 1 0
:
REV SPRINGP 1 1 - 1 2
:
DELAYP 13-16
:
MOD FXP 17-20
:
TEST SOUND
P21-24
MULTIBAND DIGITAL PARAGRAPHIC EQ
DYNAMICS
FEEDBACK
EQUALIZER
DFX
INFO VIEW
AUX
21
MAIN
L/R
AUX
2
AUX
1
MENU EXIT
SELON
MAIN
L/R
AUX
53
Press the function but-
tons indicated as "MAIN,"
"AUX1," or "AUX2" to
switch the setting between
"USE" (use) and "OFF"
(don't use).
You can't set all bus-
es to "OFF." Use the
ANTI-FEED button to
turn the feedback sup-
pressor "OFF" (disabled).
Press the function button
indicated as "Freq.Lock" to
switch the setting between
"Locked" (locked) and "Un-
locked" (not locked).
If the feedback suppres-
sor is disabled, or if this
unit's power is turned o,
the setting automatically
switches to "Unlocked."
Next, specify the bus that
uses the feedback suppres-
sor by pressing the
FEED-
BACK
section's button.
The feedback suppressor's
setting screen appears.
Locking the state of the
feedback suppressor
Although the feedback suppres-
sor is constantly monitoring
the sound and dealing with
new feedback, you can stop the
monitoring operation and lock
the state of the filter frequency
settings.
If the locations of the micro-
phones and instruments is fixed,
so that new feedback is unlikely
to occur, you can lock this after
the rehearsal/soundcheck to
prevent unintended changes in
the sound.
Press the FEEDBACK sec-
tion's
SETUP button. The
feedback suppressor's
setting screen appears.
Digital Controls Feedback Suppressor