User's Manual
Table Of Contents
- A few words from Greg Mackie.
- Selecting channels for a Mute Group.
- MAIN MIX (L/R) fader.
- Group Master Section.
- BREAK button/indicator
- MONITOR section
- STEREO IN knob
- Meter section.
- FX Master Section.
- Talkback.
- A better way.
- A traditional Monitor Mix.
- Musician's Phones.
- Aux Master AFL buttons and indicator.
- Aux Master.
- Master Control Section
- Further reading about mixing.
- A few more tips on equalization.
- MID EQ (stereo channels)
- Source Mic / Line (stereo channels).
- PFL switch / indicator
- Same as Mono Channels
- Different than
- Channel fader
- Bus Assign switches
- —20 (Signal present) LED.
- Mute button/ indicator.
- Pan.
- FX Send.
- Aux PRE Switch.
- Aux Sends
- EQ (Equalization), Mono Channels
- Comp (Compressor) and indicator.
- Gain Control.
- Mono Channel Strips.
- Channel 25-26 (or Channels 17-18) and Phones
- Musician Phones (AUX OUT 3 OR 4 + L/R INJECT)
- Aux Out.
- Group Out (sub buses).
- Monitor Out.
- Main Out.
- Talkback input.
- Foot Switch input.
- USB Out
- USB In
- USB input / output.
- Stereo input channels.
- Mono input channels.
- Power input connector
- POWER switch
- Power supply section
- Why do we start with the back of the mixer?
- How the band is set up on the mixer.
- The "pusha-bunch-'0' buttons" approach to creating a mute group.
- Un-doing the "pusha-bunch-'0' buttons" approach to creating a mute group.
- Program a Mute Group…
- Rack mounting (MW-2408 only)
- Settings that can be saved
- More on Factory Reset (restoring the factory default settings).
- Other GLOBAL options.
- Recalling a Global Scene
- Saving a Global Scene
- Global menu (scene memory, settings, initialization).
- Locking the state of the feedback suppressor
- Feedback Suppressor: Seting routing options.
- Recalling an Equalizer Setting (continued)
- Recalling an Equalizer Setting.
- Saving Equalizer settings.
- Adjusting (Narrow Mode) Continued
- Adjusting EQ Narrow Mode EQ (31 /9-band).
- Adjusting 9-band EQ (Wide Mode).
- Selecting Narrow or Wide 9-band equalization.
- Recalling a Dynamics preset.
- Saving a Dynamics setting.
- FEEDBACK SUPPRESSOR
- EQUALIZATION
- SoundLink Signal Processing*
- Gee, they don't sound like effects!
- Recalling a DFX preset.
- Saving a Digital Effects setting.
- Using the TAP button to set the delay time.
- Editing an effect
- Applying a Digital Effect
- Selecting the DFX type
- Digital Effects (DFX).
- Saving and Recalling Mute Groups.
- Combining Hard Mutes and Mute Groups.
- Adding to or subtracting channels from a Mute Group.
- Creating a Mute Group.
- "Hard muting".
- OL (Overload) LED.
Hook-up/Back panel Analog Controls Digital Controls
HYBRID ANALOG/DIGITAL MIXER
GLOBAL
SETUPANTI-FEED OVERVIEW ANALYZER
SELECTTAP
RESET
:
REV HALLP01 -02
:
REV ROOMP03-04
:
REV VOCALP05-06
:
REV STAGEP07-08
:
REV PLATEP09- 1 0
:
REV SPRINGP 1 1 - 1 2
:
DELAYP 13-16
:
MOD FXP 17-20
:
TEST SOUND
P21-24
MULTIBAND DIGITAL PARAGRAPHIC EQ
DYNAMICS
FEEDBACK
EQUALIZER
DFX
INFO VIEW
AUX
2
MAIN
L/R
AUX
2
AUX
1
MENU EXIT
SELON
MAIN
L/R
AUX
1
HYBRID ANALOG/DIGITAL MIXER
GLOBAL
SETUPANTI-FEED OVERVIEW ANALYZER
SELECTTAP
RESET
:
REV HALLP01 -02
:
REV ROOMP03-04
:
REV VOCALP05-06
:
REV STAGEP07-08
:
REV PLATEP09- 1 0
:
REV SPRINGP 1 1 - 1 2
:
DELAYP 13-16
:
MOD FXP 17-20
:
TEST SOUND
P21-24
MULTIBAND DIGITAL PARAGRAPHIC EQ
DYNAMICS
FEEDBACK
EQUALIZER
DFX
INFO VIEW
AUX
2
MAIN
L/R
AUX
2
AUX
1
MENU EXIT
SELON
MAIN
L/R
AUX
1
HYBRID ANALOG/DIGITAL MIXER
GLOBAL
SETUPANTI-FEED OVERVIEW ANALYZER
SELECTTAP
RESET
:
REV HALLP01 -02
:
REV ROOMP03-04
:
REV VOCALP05-06
:
REV STAGEP07-08
:
REV PLATEP09- 1 0
:
REV SPRINGP 1 1 - 1 2
:
DELAYP 13-16
:
MOD FXP 17-20
:
TEST SOUND
P21-24
MULTIBAND DIGITAL PARAGRAPHIC EQ
DYNAMICS
FEEDBACK
EQUALIZER
DFX
INFO VIEW
AUX
2
MAIN
L/R
AUX
2
AUX
1
MENU EXIT
SELON
MAIN
L/R
AUX
1
OFF
43
To change a parameter,
press one of the two but-
tons under either Attack or
Sens. One of the parame-
ters will illuminate.
Rotate the encoder wheel
to set the parameter value.
Press down on the encoder
wheel to enter and confirm
the parameter value.
Push the button under Edit.
Now the Limiter's adjustable
parameters are revealed.
A limiter is basically a very fast
compressor with a very short
attack and a moderately short
release. Attack controls how fast
the limiter takes to react; Sens
(sensitivity) determines how
intense a signal it reacts to.
Digital Controls Dynamics
If you press the red INFOVIEW
OVERVIEW
button, the display
will return to Status Overview
and you will see that
LIMiter on
Aux is now active.
How do you cancel a
dynamic processor? Press
the active (designated
blinking)
DYNAMICS button.
The effect with stop, the
button will change to inter-
mittant blinking and a great
big OFF will appear.
Don't forget, you can
have three dierent
dynamic processors run-
ning at the same time
Monitor mixes created
with Aux 1 and Aux 2 can
particularly benefit from
compression and limit-
ing..