User Manual

microKORG XL+
50
INTENSTY (Patch Intensity) ......................................................[–63...63]
Specifies the depth of the effect produced by the modulation source.
With a setting of 0, there will be no modulation.
Setting example for “SOURCE” and “DEST”
SOURCE [1]  DEST [2]
EQ (Equalizer)
3dB
3dB
Low EQ Frequency
High EQ Frequency
0dB
+Gain
–Gain
EQ
Here you can adjust the equalizer settings. The equalizer is a shelving type.
LO FREQ (Low EQ Frequency).......................................... [0020…1000Hz]
Specifies the frequency of the low equalizer.
LO GAIN (Low EQ Gain)................................................[–15.0…+15.0dB]
Specifies the gain of the low equalizer.
Positive (+) values boost the region below the cutoff frequency.
EG1 INT2 The FILTER2 page “EG1 INT”.
KEY TRK2 The FILTER2 page “KEY TRK”.
ATTACK1 The EG1 page “ATTACK”.
DECAY1 The EG1 page “DECAY”.
SUSTAIN1 The EG1 page “SUSTAIN”.
RELEASE1 The EG1 page “RELEASE”.
ATTACK2 The EG2 page “ATTACK”.
DECAY2 The EG2 page “DECAY”.
SUSTAIN2 The EG2 page “SUSTAIN”.
RELEASE2 The EG2 page “RELEASE”.
ATTACK3 The EG3 page “ATTACK”.
DECAY3 The EG3 page “DECAY”.
SUSTAIN3 The EG3 page “SUSTAIN”.
RELEASE3 The EG3 page “RELEASE”.
P. IN T1 The PATCH1 page “INTENSTY”.
P. IN T2 The PATCH2 page “INTENSTY”.
P. IN T3 The PATCH3 page “INTENSTY”.
P. IN T4 The PATCH4 page “INTENSTY”.
P. IN T5 The PATCH5 page “INTENSTY”.
P. IN T6 The PATCH6 page “INTENSTY”.
EG1/EG2 PITCH
The EG1 or EG2 will vary the pitch of the entire timbre over
time.
EG1/EG2 PANPOT
The EG1 or EG2 will vary the pan over time. By setting two
patches to “MOD INT” settings with the opposite (+/–) value
you can create more complex panning.
LFO 1/LFO 2 PITCH Vibrato will be applied at the LFO1 or LFO2 frequency.
LFO 1/LFO 2 CUTOFF Wah will be applied at the LFO1 or LFO2 frequency.
LFO 1/LFO 2 LEVEL Tremolo will be applied at the LFO1 or LFO2 frequency.
LFO 1/LFO 2 PANPOT Auto pan will be applied at the LFO1 or LFO2 frequency.
VELOCITY LEVEL Velocity (keyboard playing strength) will affect the volume.
KEY TRK PANPOT
Keyboard position will gradually change the pan; lower
notes at the left, and higher notes at the right.
P. B E ND PANPOT
PITCH wheel operations or pitch bend change will move
the sound between left and right.