Operation Manual

Creating songs (Sequencer mode)
82
BeatTick01.000willchangetoMeasure001Beat
Tick01.360.Thenextnoteyouinputwillbeplaced
atthislocation.
7. Inputtheremainingnotesasdescribedinsteps5
and6.(You’vealreadyinputthefirstC3note.)
Inadditiontothemethodsdescribedinsteps5and
6,youcanalsousethefollowinginputmethods.
•Toinputarest,presstheRestbutton.Thiswill
inputarestofthe“StepTime”value.
•Tomodifythelengthofanote,youcanmodifythe
“Steptime”valuebeforeyouinputthenote.
Howeverifyouwanttoextendthelength(tie)of
theno
te,presstheTiebutton.Atthistime,the
previously‐inputnotewillbeextendedbythe“Step
time”length.
•Todeleteanoteorrestthatyouinput,pressthe
StepBackbutton.Thepreviously‐inputnotewillbe
deleted.
•Toinputachord,simultaneouslypressthenotesof
thedes
i
redchord.Evenifyoudonotpressthem
simultaneously,notesthatarepressedbeforeyou
fullyremoveyourhandfromallkeysonthe
keyboardwillbeinputatthesamelocation.
•Ifyouwanttoverifythepitchofthenotethatyou
willinputnext,pressthePA
USEswit
ch.Inthis
state,playingakeywillproduceasound,butwill
notinputanote.PressthePAUSEswitchonce
againtocanceltherecord‐pausestate,andresume
inputtingnotes.
8. Whenyouarefinishedrecording,presstheDone
button.
PresstheSEQUENCERSTART/STOPswitchtoplay
back.
GototheP0
:Play/REC–MIDITrackLooppage,
checkTrackPlayLoopforMIDITrack02,setLoop
StartMeasureto001,andLoopEndMeasureto
002.MIDItrack02willplaymeasures1–2
repeatedly.
9. Ifyou’renotsatisfiedwiththeresult,pressthe
COMPAREswitchtoreturntothestatepriorto
re
cording,andthenre‐recordfromstep4.
Whenyoubeginsteprecording,alldataintheMIDI
trackthatfollowsthemeasurewhereyoubegan
recordingwillbeerased.Youneedtobeawareof
thisifyoubeginsteprecordingfromameasure
mid‐wa
ythroughthesong.
Ifyo
uwanttocopydataintoameasurethatalready
containsdata,performsteprecordinginanempty
MIDItrack,andusetheMoveMeasureorCopy
Measuremenucommands.Formoreinformation,
see“CopyMeasure”onpage 646oftheParameter
Guide,and“MoveMeasure”onpage
647ofthe
Pa
rameterGuide.
Ifyouwanttoeditoraddtotherecordeddata,you
canusetheMIDIEventEditfunction.Formore
information,see“EventEdit”onpage 654ofthe
ParameterGuide.
Recording the sound of a Combination or Program
Here’showyoucaneasilycopythesettingsofa
CombinationorProgram,andthenrecordusingthat
sound.
Whenyou’reperforminginProgramorCombination
mode,youcanusetheAutoSongSetupfunctionto
automaticallythecurrentProgramorCombination
intoasong.Alternatively,youcanusetheSequencer
mode’sCo
pyFromCombiandCopyfromProgram
menucommands.
Auto Song Setup
YoucanuseAutoSongSetupwithbothProgramsand
Combinations.Inthisexample,we’llusea
Combination.
1. SaveanyeditstotheCombination.
Ifyou’vemadeanyedits—evensimplethingslike
changingpanandvolumefortheTimbres—mustsave
thenewsettingsusingUpdateCombinationorWrite
Combinationbeforeproceeding.
Note
Ste
p
Time:
Select
Step
Time:
. 3 -
Key,
Button
Measure/
Beat Tick
C3 . C3 key 001 / 01.000
G3 - G3 key 001 / 01.360
- Rest button 001 / 02.000
C4 - C4 key 001 / 02.240
- Rest button 001 / 03.000
C4 - C4 key 001 / 03.120
D3 - D3 key 001 / 03.240
Eb3 - Eb3 key 001 / 04.000
E3 - E3 key 001 / 04.240
F3 - F3 key 002 / 01.000
- Rest button 002 / 01.120
C3 - C3 key 002 / 01.360
- Rest button 002 / 02.000
F2 - F2 key 002 / 02.240
Tie - Tie button 002 / 03.000
F2 - F2 key 002 / 03.240
- Rest button 002 / 03.360
A2 - A2 key 002 / 04.000
A3 - A3 key 002 / 04.240
- Rest button 002 / 04.360
Note
Step
Time:
Select
Step
Time:
. 3 -
Key,
Button
Measure/
Beat Tick