Operation Manual

Loading data from disk Loading individual banks from a .PCG file
193
Loading individual banks from a .PCG file
1. Selectthe.PCGfilecontainingthedatayouwant
toload.
Refertosteps1–4of“LoadingSongs,sounds,samples,
and KARMA GEs together”onpage 190.”Selectthe
.PCGfileinstep5.
2. PresstheLoadbutton.
Youcanloadindividualbanksbyusing“.PCG
Contents”inthedialogboxtoselecttheload‐source
bank,and“To”toselecttheload‐destinationbank.
WhenyoupressOK,thesourcebank’sPrograms,
Combinations,DrumKits,andWaveSequenceswillbe
loadedintothedestinationbank.Globalsettingdata
willnotbeloaded.
Ifyouset“.PCGContents”toBankINT–A,and“To”to
BankINT–A,datawillbeload
edasfollows.
Programs
•BankINT–A:loadedintoBankINT–A
Combinations
•BankINT–A:loadedintoBankINT–A
DrumKits
•INT:loadedintoBankINT
WaveSequences
•INT:loadedintoBankINT
Whendataisloadedintoabankthatisdifferentthan
itsoriginalbank,thedata(bank,program,pattern,and
kitnumbers,etc.)willautomaticallybereconfiguredso
thatafterloading,thevarioustypesofdatawill
correspondcorrectlyineachmode.
Thefollowingdatawillalsobereconfigured
automaticallyifyouhavechecked“Load.SNGtoo”(so
thatsongdataisloadedatthesametime),the
followingdatawillalsoberecon
figuredautomatically
inordertoensurethatthesongdataplaysback
correctly.
•Thebankofeachprogramusedbycombinations
•Thebankofeachdrumkitandwavesequenceused
byeachprogram
•Thebankoftheprogramusedbyeachtrackofthe
song
•Ifthesongcontainstrack/patt
ernev
ents,the
programbankswithintheseevents
Loading data by individual item or bank
TheKRONOSletsyouloadprograms,combinations,
drumkits,andwavesequencesindividuallyorby
individualbanks.
Thisisaconvenientwaytorearrangecombinationsin
theorderinwhichyouwillusethemduringalive
performance.
BeawarethatifyouchangetheorderofPrograms,
thesoundsplayedbyCombinationsmayalsobe
affe
cted.
Asanexamplehere,wewillexplainhowa
CombinationsavedinbankINT‐Fcanbeloadedinto
INT‐E000.
1. Movetothe“BankINT‐F”directory,andselectthe
combinationthatyouwanttoload.(.PCG
file/Combinations/BankINT‐F/)
Theprocedureisasfollows.
1)Pe
rformst
eps1–5under“LoadingSongs,sounds,
samples,and KARMA GEs together”onpage 190.
Selectthe.PCGfilecontainingthedatayouwantto
load(itwillbehighlighted),andpresstheOpen
button.
2)Press“Combinations”tohighlightit,andpress
theOpenbutton.
3)Press“BankF”tohighlightit,andpresstheOpen
button.