Operation Manual

Front and rear panels TouchView user interface
11
Pin
Manypopupmenushavea“Pin”inthe
upperleft.Thiscontrolswhathappens
afteryouselectavalue.Touchthepin
graphictoswitchbetweenopen
(unlocked)andclosed(locked).
Whenlocked(pinclosed),thepopupmenuwillremain
displayedevenafteryouselectaparametervalue.To
closethepopup,ei
therunlockthepin,orpressEXIT.
Whenunlocked(pinopen),thepopupmenuwillclose
immediatelywhenyoupressaparametervalue,or
whenyoutouchthescreenoutsidethemenu.
Tabbed popup menus
Somepopupshavealargenumberofitemsdivided
intogroups.Thegroupsarerepresentedbytabsonthe
left‐handsideofthescreen.Theseinclude:
• Bank/ProgramSelectandBank/CombinationSelect:
SelectProgramsorCombinationsbybank
•MultisampleSelect:SelectaMultisamplefora
Programoscillatorbycategory
• WaveSequenceSelectandDrumKitSe
lec
t:Selecta
WaveSequencesorDrumKitforaProgram
oscillatorsbybank
• EffectSelect:Selectaneffectbycategory
•SelectauserSampleforauserMultisample
•SelectaKARMAGE
Tocloseatabbedpopupmenu,presstheOKbuttonor
Cancelbutton.
Scroll bar
Whenalististoolongforallitemstofitonthescreen
atonce,thepopupincludesscrollbars.Youcantouch
intheemptyareasofthescrollbartomovebackand
forthinthelist,ortouchanddragthescrollhandle.
d: Edit cell
WhenyoutouchaparameterintheLCDscreen,the
parameterorparametervaluewillusuallybe
highlighted(displayedininversevideo).Thisiscalled
theeditcell,andthehighlighteditemisnowselected
forediting.
Theparametervalueoftheeditcellcanbemodified
usingtheVALUEcontrollers.Insomec
ases,yo
umay
alsouseapopupmenu,asdescribedbelow.
Forparametersthatacceptanotenumberoravelocity
value,youcanalsoholddowntheENTERswitchand
playanoteonthekeyboardtoenterthenotenumber
orvelocityvalue.
e & f: On-screen sliders and knobs
Tomodifythevalueofanon‐screensliderorknob,first
touchtheobject,andthenusetheVALUEcontrollers
tomodifythevalue.
g & h: Page group tabs and Page tabs
Pressthelowerrowoftabstoselectthepagegroup,
andthenpresstheupperrowoftabstoselectthepage.
Thetopofthescreenshowsthenameofthecurrent
pageandgroup,asdescribedunder“a:Currentpage”
onpage 10.
i: Page menu button
Whenthisbuttonispressed,alistofmenucommands
willappear.Theavailablecommandswillvary
dependingonthecurrentpage.Toselectacommand,
justtouchit.
ThepagemenuwillclosewhenyoupresstheLCD
screenatalocationotherthanthepagemenu,orwhen
youpr
esstheEXITswitch.
Eventhougheachpagemayhaveitsownunique
menucommands,themenusarestandardizedasmuch
aspossible.Forinstance,WRITEisalmostalwaysthe
firstmenuiteminProgram,Combination,SetList,and
Globalmodes.
Menu shortcut: ENTER + numeric keypad
Youcanuseashortcuttoaccessanyofthefirstten
menuitems:
1. HolddowntheENTERkey.
2. Pressanumber(0‐9)onthenumerickeypadto
selectthedesiredmenucommand,startingwith0.
Forinstance,press0forthefirstmenucommand,1for
thesecond,andsoon.
Ifthemenuco
mmandjusttogglesanoptiononandoff
(suchasExclusiveSolo),thenyou’redone.Ifthe
commandcallsupadialogbox,thedialogwillappear
ontheLCD,andyoucanproceedjustasifyou’d
selectedthecommandfromthetouch‐screen.
Dialog box
Manymenucommandsusedialogboxestomake
additionalsettings.Thedialogboxthatappearswill
dependonthecurrentlyselectedmenucommand.
Toconfirmsettingsinadialogbox,presstheOK
button.Toexitwithoutmakingchanges,pressthe
Cancelbutton.AfterpressingeitherOKorCancel,the
dialogboxw
illclose.
Pin
Press here and slide to left or right to
scroll to the desired location.
Press here to scroll to left or right.
Press here to scroll to the
corresponding location.