Operation Manual

Global Settings Pedal and other controller settings
161
Creating an External Setup
TocreateanewExternalSetup:
1. GototheGlobalP1:MIDIpage,andpressthe
External1tab.
TheExternal1pageappears,withMIDIchanneland
CCassignmentsforeachoftheControlSurfacesliders,
knobs,andswitches.
2. Atthetopofthepage,settheExternalModeSetup
parametertotheExternalSetu
pthat
you’dliketo
edit.
3. Setupeachslider,knob,andswitchasdesired.
SlidersandknobssendthefullrangeofCCvalues,
from0to127.Switchesjustsendavalueof0when
they’returnedoff,and127whenthey’returnedon.
GchmeansthatthesliderwilltransmitontheGl
obal
MIDIChannel.
4. UsetheWriteGlobalSettingmenucommandto
savethenewExternalSetup.
Formoreinformation,see“WritingGlobalsettings”on
page 185.
Selecting External Setups
Onceyou’vecreatedoneormoreExternalSetups,
you’ rereadytouseittocontrolexternaldevices.First,
you’llwanttoselectthesetup.
1. OntheGlobalExternal1page,settheExternal
ModeSetupparametertotheExternalSetupthat
you’dliketouse.
2. PressthePROGbuttontoenterProgrammode.
3. UnderCONTROLASSIGN,presstheEXTbu
tton.
ThisputstheControlSurfaceintoExternalmode.
4. GototheControlSurfacepage.
LookattheSetupparameterontheright‐handsideof
thedisplay.NoticethattheExternalSetupyouselected
instep1isstillactive.
5. UsetheSetupparametertoselectadifferent
External
Setup.
6. PresstheCOMBIbuttontoenterCombination
mode.
7. UnderCONTROLASSIGN,presstheEXTbutton.
8. GototheControlSurfacepage.
LookattheSetupparameterontheright‐handsideof
thedisplay.NoticethattheExternalSetupyouselected
inProgrammodeisstillactive.Theselectionstays
activ
euntilyouchangeit,regardlessofwhatsound
youselectorwhichmodeyou’ rein.Thismakesiteasy
toselectdifferentKRONOSsoundswithoutdisrupting
anyexternalMIDIcontrol,andvice‐versa.
Pedal and other controller settings
TheControllerstaboftheControllers/Scalespagelets
youcontrolhowthefootswitchesandfootpedalwill
work,aswellassettingupcontrollermappingsforthe
KARMAcontrolsandthechordpads.
Setting up the Assignable Switch and
Pedal
Assignable Switch
FootSwitchAssignletsyouassignafunctiontoa
footswitch(suchastheoptionalKorgPS‐1)connected
totherear‐panelASSIGNABLESWITCHjack.
Youcanchoosefromthefollowingfunctions:
•AMS(AlternateModulation)sourceforcontrolling
sounds
•Dmod(dynamicmodulation)sourceforcontrolling
effects
•Portamentoon/off
• Sostenuto
•Softpedal
•Stepupordownthroughso
und
s,including
Programs,Combinations,andSetListSlots
• Start/stopthesequencer
•Punch‐in/outonthesequencer
•Taptempo
•KARMAon/off
•DrumTrackon/off
•ChordModeon/off
•Selectminandmaxvaluesforcontrollers,including
thejoystick,ribbon,knobs,andKARMAsliders.
• Triggerchordsfromtheon‐screenpads
Assignable Pedal
Youcanspecifythefunctionthatwillbeperformedby
anassignablepedal(theoptionalXVP‐10EXP/VEL
pedalorEXP‐2footcontroller)connectedtothe
ASSIGNABLEPEDALjack.
ThisiscontrolledbytheFootPedalAssignparameter.
Youcanchoosefromthefollowingfunctions:
• Mastervolume
•Alternatemodulationsource
•Effectdynamicmodulationsour
ce
•Portamentopitchchangespeed