Operation Manual

Sampling (Open Sampling System)
146
ThiswillsetRangeStartandRangeEnd.
IfyoupresstheENTERswitchthreeormoretimes,
RangeStartandRangeEndwillrespectivelybeset
Themethodgivenaboveapplieswhensomething
otherthanRangeStartorRangeEndisselected
(highlighted).
IfRangeStartorRangeEndareselected
(highlighted),these
ttingwillbeupdatedeachtime
youpresstheENTERswitch.
IfRangeStartorRangeEndareselected
(highlighted),thisregionwillplayback.
Whenyoufinishmakingsettings,pressthe
SEQUENCERSTART/STOPswitchtostopplayback
oftheaudioCD.
10.Verifytheregionthatwillberipped.
Selecteither“RegionStart”or“R
egionEnd”(the
displaywillbehighlighted),andpressthe
SEQUENCERSTART/STOPswitch.TheCDwill
playfromRangeStarttoRangeEndandthenstop.
Ifyouwanttoadjustthelocation,usetheVALUE
controllerstomodifytheRangeStartorRangeEnd
settings,ormovethecur
sortoaparameterother
thanRangeStartandRangeEndandrepeatstep8
tomakethesettingonceagain.
Ifyouwanttomovethetrackplaybackstart
locationtothebeginningofthetrack,pressthe
LOCATEswitch.
11.WhenyouhavefinishedsettingRangeStartand
RangeEnd,selectthepagemenucommand
“Destination.”
Adialogboxwillappear.
Specifythedestinationtowhichtherippedsample
willbewritten.
SelectRAMifyouwanttoripthesampleintoRAM
memory.Inthiscase,youcanalsosetSampleNo.
(L),(R)tospecifythesamplenumberthatwillbe
writte
n.Normallyyoucanleavethisunchanged.
SelectDISKifyouwanttoripthesampletomedia.
Use“DriveSelect”toselectthedrive,andusethe
OpenandUpbuttonstoselectthedirectoryin
whichthedatawillbesaved.Alsospecifyaname
fortheWAV
Efilethatwillbesaved.
12.PresstheOKbuttontoexecuteripping,orpress
theCancelbuttontocancelwithoutexecuting.
WhenyoupresstheOKbutton,the“Obey
CopyrightRules”dialogboxwillappear.
13.CarefullyreadtheCOPYRIGHTWARNINGin
theQuickStartGuide,andifyouconsenttothe
terms,presstheOKbutto
ntobeginripping.Ifyou
donotconsenttotheterms,presstheCancel
buttontocanceltheoperation.
Saving, converting to Programs, and Comparing
Saving Samples and Multisamples
AnySamplesandMultisamplesthatyoucreateor
editinSamplingModemustbesavedinDisk
mode,orthey’llgoawaywhenyouturnoffthe
power.ThisisdifferentfromProgramsand
Combinations,whichcanbewrittentomemory.For
moreinformation,see“Sometypesofdatamustbe
save
dtodisk”onpage 186.
TosaveonlytheSamplesandMultisamples,usethe
SaveSampleDatamenucommandontheDisk–Save
page.
Ifyouwanttocreateanarchiveofthecurrentsetup,
includinganyPrograms,WaveSequences,orDrum
Kitswhichusethesampledata,werecommendthat
yo
uus
eSaveAllinordertoensurethatthesounds
willbereproducedcorrectlythenexttimeyouload
them.
Formoreinformation,see“Savingtodisks,CDs,and
USBmedia”onpage 186.
KSC Files and User Sample Banks
KSCstandsforKorgSampleCollection.KSCfilesare
savedtoandloadedfromdisk;theygroupyour
SamplesandMultisamplestogether,andletyouload
themasUserSampleBanks.
UserSampleBanksmaybeloadedeitherintoRAM,or
mayuseVirtualMemory,justlikeEXs.Theyhave
otherbenefitsaswe
l
l.Formoreinformation,see
“Creatingandsaving.KSCfiles”onpage 165.
Converting a Multisample to a Program
InpagesP0:Recording–P4:EQ/Controller,youcanuse
theConvertMSToProgrampagemenucommand.
Whenyouexecutethiscommand,thesettingsofthe
currentlyselectedMultisamplewillbeconvertedintoa
Program.InProgrammodeyoucanmakefilter,amp
andeffectsettingsetc.,andplaythesampleasa
pr
ogram.Theresu
ltingProgramcanbeusedina
combinationorsong.
IfyouwanttouseaMultisamplecreatedinSampling
modeasaProgram,gototheProgramP2:OSCPitch
pageandselectRAMMonoorRAMstereoastheBank
forOSC1Multisample/WaveSequenceorOSC2