User Manual

Using the KP3+ as a MIDI control-

ler

In External Control mode you can use the

KP3+ as a MIDI controller to control an ex-

ternal MIDI device such as a synthesizer, or a

software synthesizer on your computer.

Example connections for External Control

mode

MIDI INMIDI OUT

ELECTRIBE MX-SD

TIP: For details on the parameters that can be con-

trolled, please refer to the owner’s manual of the de-

vice or software that you’re using.

TIP: Depending on the device or software that you’re

using, there may be cases where parameters cannot

be controlled, or cases where you must adjust set-

tings rst. Please refer to the owner’s manual for the

device or software that you’re using.

Switching to External Control mode

Hold down the SHIFT button and press the

PROGRAM MEMORY 8 (EXT.CTRL) button.

To exit External Control mode, press the

SHIFT button.

MIDI message assignments in External Con-

trol mode

Assignments for the MIDI messages transmit-

ted in External Control mode are made using

the KP3+ Editor.

TIP: The KP3+ Editor can be downloaded free of

charge from the Korg website (http://www.korg.com).

For details on how to adjust these settings, please

refer to the documentation included with the KP3+

Editor.