User Manual

10
Selecting a bell for the accent
1. Hold down the METRONOME buon until the Met-
ronome seings mode is entered.
2. Press the E.PIANO1 buon, and the accent sound set-
ting will appear in the display.
3. Select the seing with the UP or DOWN buon be-
side the display.
TheseingrangeconsistsofoFF(noaccentsound),on1
(emphasized sound for the accent beat) and on2 (bell
soundfortheaccentbeat);thedefaultseingisoFF.
2
1,4
3
3
4. Press the METRONOME button to exit the Metro-
nome seings mode.
Specifying the tempo (Metronome settings mode)
1. Hold down the METRONOME buon until the Met-
ronome seings mode is entered.
2. Press the E.PIANO2 buon, and the tempo will ap-
pear in the display.
3. Specify the setting with the UP or DOWN button
that’s located beside the display.
Theseingrangeis
𝅘𝅥
=40–240;thedefaultseingis120.
To return to the default setting, simultaneously press
theUPandDOWNbuons.
2
1,4
3
3
4. Press the METRONOME button to exit the Metro-
nome seings mode.
Selecting the Metronome Sound
1. Hold down the METRONOME buon until the Met-
ronome seings mode is entered.
2. Press the HARPSI/CLAV buon, and the metronome
sound seing will appear in the display.
3. Specify the setting with the UP or DOWN button
that’s located beside the display.
The setting range consists of 1 (acoustic) and 2 (elec-
tronicsound);thedefaultseingis1.
2
1,4
3
3
4. Press the METRONOME button to exit the Metro-
nome seings mode.
The metronome
The LP-380 is equipped with a metronome, which can be
changed to a bell sound, which is convenient for practicing.
Turning on/o󰀨 the metronome
Press the METRONOME button. The
button lights up, and the metronome
starts.
To stop the metronome, press the METRONOME button
again.Thebuonturnso.
Specifying the tempo
When the tempo appears in the dis-
play(defaultseingof120),regardless
of whether the metronome is turned
on or off, the tempo can be specified
withtheUPandDOWNbuonsbesidethedisplay.
Theseingrangeis
𝅘𝅥
= 40
– 240.
Toreturntothedefaultseing,simultaneouslypressthe
UPandDOWNbuons.
Selecting the time signature
1. Hold down the METRONOME buon until the Met-
ronome seings mode is entered.
TheMETRONOMEbuonblinks,thePIANO1sound
buonlightsup,andthetimesignature(04)appearsin
the display.
When the Metronome settings mode is entered, the
timesignatureseingnormallyappears.
2. To select the time signature after changing other
settings in the Metronome settings mode, press the
PIANO1 buon.
3. Select the seing with the UP or DOWN buon be-
side the display.
The setting range consists of 02 (2/4), 03 (3/4), 04 (4/4)
and06(6/4);thedefaultseingis04.
2
1,4
3
3
4. Press the METRONOME button to exit the Metro-
nome seings mode.
Adjusting the metronome volume
1. Hold down the METRONOME buon until the Met-
ronome seings mode is entered.
2. Press the PIANO2 button, and the volume will ap-
pear in the display.
3. Specify the setting with the UP or DOWN button
that’s located beside the display.
Theseingrangeis1–13;thedefaultseingis10.
To return to the default setting, simultaneously press
theUPandDOWNbuons.
2
1,4
3
3
4. Press the METRONOME button to exit the Metro-
nome seings mode.