User Manual

4
12. Sound buons:
Thesebuonsareusedtoselectfrom30sounds(10×3
banks).Twobuonscanbepressedtoplaytwosounds
simultaneously (Layer mode).
13. Display:
Thedisplayshowsseings,forexample,fortheFunc-
tion mode and the metronome.
14. UP/DOWN buons:
Thesebuonsareusedtoselectavalueforthevarious
seings.
15. METRONOME buon:
Thisbuonisusedtostart/stopthemetronome.While
themetronomeisbeingused,thebuonlightsup.In
addition,holddownthebuontoentertheMetronome
seingsmode,wherevariousmetronomeseingscan
bespecied.
16. USB port:
Connect the USB port on the LP-380 to your computer
with a USB cable to exchange MIDI and audio data.
17. LINE OUT jack:
This is the main audio output jack, where a stereo mini
plugcanbeconnectedtotheinputjackofanamplier
or powered speakers, or to the AUX In jack of other
gear.
Use the VOLUME knob to set the output volume.
18. DC 19V jack:
Connect the included AC adapter here.
19. Speaker connector:
Connect the cable from the speaker box here (cf. As-
sembling the Stand).
20. Pedal connector:
Connect the cable from the pedal unit here (cf. Assem-
bling the Stand).
1
2
12
14
3
13
5
4
6
8
7
10
11
9
15
16
17
18
19 20
Connector box
Control panel
Connector box
(on the back)
1. Headphone ( ) jacks (Front of the conector box):
Two stereo mini plugs for headphones can be inserted
here. When the headphone plug is inserted, the inter-
nal speaker will not produce sound.
2. Power buon:
ThisbuonturnstheLP-380onoro.
3. VOLUME Knob:
This knob adjusts the volume for the speakers, the Out-
put and the Phones connectors.
4. PIANO SONG buon:
ThisbuonisusedtoenterthePianosongmode,after
which the button lights up. Simultaneously pressing
this button and the TRANSPOSE button enters the
Sound demo song mode.
5. TRANSPOSE buon:
Thisbuonisusedtoadjusttransposition.Whiletrans-
posing,thebuonlightsup.Simultaneouslypressing
this button and the PIANO SONG button enters the
Sound demo song mode.
6. FUNCTION buon:
ThisbuonisusedtoentertheFunctionmode,where
pitch, temperament and other settings can be speci-
ed.HolddownthebuontoentertheMIDIfunction
mode,whereMIDIseingscanbespecied.Thebuon
lights up when the LP-380 enters the Function mode
and blinks when it enters the MIDI function mode.
7. TOUCH buon:
Thisbuonletsyouselectthekeyboardsensitivity.
8. BRILLIANCE buon:
Thisbuonisusedtoadjustthebrightnessofthetone.
9. REVERB buon:
This button is used to turn on/off the reverb, which
addsambiencetothesound.Whenthiseectison,the
buonwillbelitup.
10. CHORUS buon:
This button is used to turn on/off the chorus, which
addsrichnesstothesound.Whenthiseectison,the
buonwillbelitup.
11. BANK buon/LEDs:
This button is used to select the desired sound bank.
The LED for the bank that’s currently selected will
light up.
Parts and their functions