User Manual

15
Enabling/disabling control change transmission/
reception ltering
This lets you transmit damper pedal signals and other
data from the LP-380 to control a MIDI application run-
ning on your computer, or control the LP-380 as it receives
said data from the MIDI application on your computer.
To transmit/receive control change messages, disable this
function(oFF:defaultseing).Tonottransmit/receivethe
messages, enable this function (on).
• Enter the MIDI function mode, and then press the
E.PIANO2 buon.
TheE.PIANO2soundbuonlightsup,andtheseing
(oFF) appears in the display.
Using the LP-380 as a multi-timbral sound module
The 16-part multi-timbral sound generator on the LP-380
can be controlled and played from a MIDI application on
your computer.
1. Connect the USB port on the LP-380 to your computer
with a USB cable.
2. Transmit MIDI data from the sequencer or other ap-
plication on the connected computer.
Fordetailsontransmiingdatafromthesequenceror
other MIDI device, refer to its user’s manual.
3. When the LP-380 receives the program change message
along with the performance data, it will play with the
sound corresponding to that program number.
If the LP-380 is not to be used as a multi-timbral sound
module, disable this function (oFF).
• Enter the MIDI function mode, and then press the
HARPSI/CLAV buon.
The HARPSI/CLAV sound button lights up, and the
seing(on:defaultseing)appearsinthedisplay.
Enabling/disabling program change transmis-
sion/reception ltering
You can send MIDI program change numbers from the LP-
380 to change programs on MIDI applications that are run-
ning on the computer that you have connected. Also, the
LP-380 can receive MIDI program change numbers sent
from a MIDI application running on the computer you
have connected, to change programs on the LP-380.
This will not change the sound you hear when playing
the keyboard of the LP-380.
For program change numbers and their corresponding
sounds, refer to “Table of sounds and corresponding pro-
gram change numbers” below.
To transmit/receive program change messages, disable this
function(oFF:defaultseing).Tonottransmit/receivethe
messages, enable this function (on).
• Enter the MIDI function mode, and then press the
E.PIANO1 buon.
TheE.PIANO1soundbuonlightsup,andtheseing
(oFF) appears in the display.
Transmiing program changes
When a sound is selected using the sound buttons and
BANKbuonontheLP-380,thecorrespondingMIDIpro-
gramchangenumberistransmied.
Receiving program changes
When the LP-380 receives a MIDI program change num-
ber, the sound is changed to the corresponding number.
If an incompatible program change number is re-
ceived, the LP-380 sound is not changed.
Table of sounds and corresponding program change
numbers
CC0: Bank Select (MSB) for all sounds is set to 121.
Sound Buon Bank CC32 PC Sound
PIANO1
1 1 0 Classic Piano
2 0 0 Grand Piano
3 0 1
Jazz Piano
PIANO2
1 2 0
Live Piano
2 0 3 Honky-Tonk
3 0 2 Elec.Grand
E.PIANO1
1 0 4 Club E.piano
2 1 4 Vintage E.Piano
3 3 4 Tremoro EP
E.PIANO2
1 0 5 Dig.E.Piano1
2 2 4
60'sE.Piano
3 1 5 Dig.E.Piano2
HARPSI/C LAV
1 0 6 Harpsichord
2 0 7 Clav
3 1 7 Synth Clav
VIBES/
GUITAR
1 0 11 Vibraphone
2 0 12
Marimba
3 0 24 Acoustic Guitar
ORGAN1
1 0 16 Jazz Organ1
2 1 16 Jazz Organ2
3 0 17 Jazz Organ3
ORGAN2
1 0 19 Pipe Organ1
2 1 19 Pipe Organ2
3 2 19 Positive Organ
STRINGS
1 0 48 Strings
2 0 50 Cinema Strings
3 1 50 Analog Strings
CHOIR
1 0 52 Aah Choir
2 1 52 Ooh Voices
3 2 52
Classical Choir