User Manual

Playing and editing Combinations
82
Saving your edits
Once you’ve tweaked the sound to perfection, you’ll want to
save your work. To save your edits:
1. Select the Write Combination command from the
page menu, at the upper right-hand corner of the
screen.
You can also call up this menu command by holding
ENTER and pressing 0 on the numeric keypad.
This brings up a dialog box which allows you to save the
Combination. Optionally, you can also select a new location,
or change the Combination’s name.
2. Press the “T” button to bring up the text edit dialog.
You can give the Combination a descriptive name using the
on-screen keyboard.
3. After entering the name, press OK.
The text edit window will disappear, returning you to the
main Save dialog.
4. Under “To” at the bottom of the dialog, press the
popup button next to Combination to bring up the
save location dialog.
5. Select a location to save the edited Combination.
You can write to any location in banks INT and USER A-G.
To avoid overwriting the factory sounds, it’s safer to use a
slot in one of the empty User banks.
6. After selecting the location, press OK.
7. Press OK again to start the write process.
8. If you’re sure you want to write to this location, press
OK again.
After that, you’re done!
For more information, see “Writing Programs and
Combinations” on page 200.
Do not turn off the power for at least 10 seconds after
writing the Combination. This allows the system time to
complete the process, which includes saving a backup of
the data to the internal disk.
Saving to disk
You can also save and manage Combinations on the internal
disk and USB storage devices. For more information, see
“Saving to disks, CDs, and USB media” on page 204.