User Manual
Appendices
278
Directory is not empty Cleanup directory
Are you sure?
Meaning: When deleting a directory, files or directories
exist within that directory.
• Press the OK button to delete all files and/or directories
within that directory.
Disc full
Meaning: When using the Write to CD command in the
Disk mode Make Audio CD page, there is insufficient space
remaining on the CD-R/RW for the data to be written.
• Either write to other media, or remove unneeded tracks.
Disk not formatted
Meaning: When you attempted to perform a high-level
format (quick format) of media, the media had not been
physically formatted yet. To solve this problem:
• Use the Disk mode Utility page menu command Format
to physically format the media (full format).
E (Error–Exceeded)
Error in formatting medium
Meaning: An error occurred while performing a physical
format (full format) or high-level format (quick format) of
the media. To solve this problem:
• Use other media.
Meaning
: When executing the Disk mode Utility page menu
command Convert to ISO9660 Format, an error occurred
while rewriting the UDF area. To solve this problem:
• Use other media.
Error in mount process. Please backup
files
Meaning: An error was found on a UDF-format CD-R/RW
or DVD-R/RW disk. To solve this problem:
• Make a backup of the data, and stop using the disk which
caused the error.
Error in reading from medium
Meaning: An error occurred while reading data from media.
This error may also appear when data is being written to
media by a Save or Copy operation. To solve this problem:
• Execute the reading operation once again. If the same
error occurs, it is possible that the data on the disk has
been damaged.
Error in writing to medium
Meaning: A verification error occurred while writing data to
the internal disk or USB storage device. To solve this
problem:
• Use the Disk Utility page menu command Check
Medium to detect and repair errors on the media. For
more information, see “Check Medium” on page 866 of
the Parameter Guide.
• It is possible that the media has been physically
damaged. Try another storage device, and avoid using
the one that produced the error.
Error: invalid option file
Meaning: While preparing to install an option (such as an
EXs), the system has detected corrupted data in the files to
be installed. To solve this problem:
• Copy the file to the USB media again, or if that fails,
download the data again.
Error loading Drumsamples.
Error loading Multisamples.
Meaning: When executing Change load method, a sample
could not be loaded correctly.
Error: not enough disk space for the
installation
Meaning: While preparing to install an option (such as an
EXs), the system has determined that the internal SSD is too
full. To solve this problem:
• Remove data from the SSD, backing it up to USB media,
in order to free up space.
Error unloading Drumsamples.
Error unloading Multisamples.
Error unloading Exs
Error unloading RAM
Meaning: When executing Change load method or Unload
all data from selected bank, a sample could not be
unloaded correctly.
Exceeded 1000 measure limit
Meaning: The length of the Standard MIDI file being loaded
would exceed the maximum of 1,000 measures.
Exceeded 16 Programs
Meaning: You exceeded 16 programs while performing
Advanced Conversion Load. When an AKAI Program is
loaded, it will be converted into multiple programs and one
combination according to its structure. At this time, the
maximum number of KRONOS programs resulting from