User Manual
Loading data from disk Loading the samples required by Programs or Combinations
213
3. Select the Load complete banks radio button to load
the entire bank(s) containing the data.
Check the Memory Required and (Memory) Available to
see that there’s enough room to load the data.
4. Press Load to load the data, or Cancel to exit without
loading.
If you’d like to automatically load the sample data in the
future:
5. Save the result as a new KSC file.
To do so, follow the instructions under “Saving a KSC file”
on page 185.
6. Set up the new KSC file to load automatically at
startup.
Follow the instructions under “Adding a KSC to the list” on
page 183.