User Manual
Table Of Contents
- About this manual
- Table of Contents
- Introduction to the KROSS
- Setup
- Playing and editing Programs
- Playing Programs
- Quick Layer/Split function
- Easy program editing
- Detailed Editing with Programs
- Before you start editing
- An overview of the edit pages
- Basic oscillator settings
- Creating time-varying changes (LFO and EG)
- Diverse modulation settings (AMS and AMS mixer)
- Controlling Pitch
- Using Filters
- Using the Amp section
- Making controller assignments
- Arpeggiator settings
- Drum Track settings
- Using the step sequencer
- Effects
- Automatically importing a Program into Sequence mode
- Playing and editing Combinations
- Playing combinations
- Editing a combination
- Summary of the edit pages
- A suggested approach for editing
- Comparing with the sound before you started editing
- Changing the program of each timbre
- Adjusting the mix
- Using the Tone Adjust and EG Adjust functions
- Saving a Combination you’ve edited
- Using REALTIME CONTROLS to adjust the sound or effects
- Layers, Splits, and Velocity Switches
- Status settings
- MIDI settings
- Changing the program settings to match the combination
- Arpeggiator settings
- Drum Track settings
- Using the step sequencer
- Effects
- Automatically importing a combination into Sequence mode
- Favorites function
- Sequencer
- Using Effects
- Arpeggiator function
- Drum Track function
- Step sequencer
- Pad Sampler
- Audio recorder
- Pad audio play
- Using Drum Kits
- Overall settings for the KROSS, and saving/loading data
- Appendices
27
Playing and editing Programs
About the KROSS’s Programs
Programs are the basic sounds of the KROSS; you can play
and edit them in Program mode.
You can play them by themselves, layer them together in
Combinations, or play a different Program on each of the 16
MIDI tracks, either from the internal sequencer or from
external computer-based sequencers.
This section of the manual takes a quick look at playing
Programs, including tours of the front-panel controllers and
basic editing techniques.
Playing Programs
Selecting Programs
1. Press the PROG button. (LED lit)
You’ll enter Program mode.
Access the PROG> MAIN page. The upper line of the
display shows the page that you’re on. If a different page
is shown, press the EXIT button several times to access
the PROG MAIN page.
Tip: In the PROG> MAIN page, you can also select
programs by using the cursor buttons ▲▼ or the VALUE
dial.
2. Turn the CATEGORY dial to select the category of
program that you want to play.
The sound select list will appear.
Tip: The sound select list will also appear when you press
the ENTER button.
You can also use the cursor buttons ◄► to switch
categories.
3. Turn the VALUE dial to select the program that you
want to play.
Play the keyboard to hear the sound.
Tip: You can also select programs by using the cursor
buttons ▲▼ or the PAGE-(▲)PAGE+(▼) buttons.
4. To return to the MAIN page, press the MENU button
or the ENTER button to close the menu.
When you press the FUNCTION button or the EXIT
button, your selection will be discarded and you’ll return
to the program where you were before opening the list.
Other ways to select programs
In addition to using the controls on the KROSS’s front panel,
you can select programs in the following ways.
• Using a connected foot switch (see page 24)
• Receiving a MIDI program change (from an external
MIDI sequencer or MIDI controller)
• Selecting a program that you’ve registered in Favorites
(see page 53)
• Selecting a VOCODER or other program that's
optimized for use with a mic input by the REALTIME
CONTROLS. (see page 15)
1
2
3
2
,
4
2
,
3
3 3
Mode, page name Tabs Tempo Power supply
Category icon
(Bank USER icon)
Program name
SW control information
Category type: Program number (bank number)