User Manual
Table Of Contents
- About this manual
- Table of Contents
- Introduction to the KROSS
- Setup
- Playing and editing Programs
- Playing Programs
- Quick Layer/Split function
- Easy program editing
- Detailed Editing with Programs
- Before you start editing
- An overview of the edit pages
- Basic oscillator settings
- Creating time-varying changes (LFO and EG)
- Diverse modulation settings (AMS and AMS mixer)
- Controlling Pitch
- Using Filters
- Using the Amp section
- Making controller assignments
- Arpeggiator settings
- Drum Track settings
- Using the step sequencer
- Effects
- Automatically importing a Program into Sequence mode
- Playing and editing Combinations
- Playing combinations
- Editing a combination
- Summary of the edit pages
- A suggested approach for editing
- Comparing with the sound before you started editing
- Changing the program of each timbre
- Adjusting the mix
- Using the Tone Adjust and EG Adjust functions
- Saving a Combination you’ve edited
- Using REALTIME CONTROLS to adjust the sound or effects
- Layers, Splits, and Velocity Switches
- Status settings
- MIDI settings
- Changing the program settings to match the combination
- Arpeggiator settings
- Drum Track settings
- Using the step sequencer
- Effects
- Automatically importing a combination into Sequence mode
- Favorites function
- Sequencer
- Using Effects
- Arpeggiator function
- Drum Track function
- Step sequencer
- Pad Sampler
- Audio recorder
- Pad audio play
- Using Drum Kits
- Overall settings for the KROSS, and saving/loading data
- Appendices
Media utility Formatting SD card
129
Media utility
Formatting SD card
Newly purchased media or media that has been used by
another device cannot be used “as is;” you must format the
SD card before you can use it with the KROSS.
When you format the SD card, all data that had been
saved on that media will be erased. Be sure to double-
check the SD card for data before you format.
You must use the KROSS to format the media. The
KROSS will not correctly recognize media that has
been formatted by another device.
1. Correctly insert the SD card to be formatted into the
SD card slot. (see “Inserting/removing an SD card” on
page 25)
2. Access the MEDIA> UTIL page.
Hold down the EXIT button ( ) and press the
SEQ button ( ). Use the PAGE+ and PAGE-
buttons to access the MEDIA> UTIL page.
3. Select the Format function.
Press the FUNCTION button. Use the PAGE+ (▼)
button to select Format, and then press the MENU (OK)
button. A dialog box will appear.
4. Press the MENU (OK) button to format, or press the
FUNCTION (CANCEL) button if you decide to cancel.
When you press the MENU (OK) button, a message will
ask you for confirmation. Press the MENU (OK) button
once again to execute the Format operation.
Never remove an SD card from the slot while
formatting is in progress.
Setting the current time
Specify the date and time; this is used to record the correct
date and time when you save data.
Since the KROSS does not contain a calendar or clock,
you should use the Set Date/Time function to specify
the date and time before saving, if necessary.
1. Select the MEDIA> UTIL page Set Date/Time
function. (see steps 2 and 3 of “Formatting SD card”)
A dialog box will appear.
2. Use the VALUE dial to set the correct year, month,
day, hour, minute, and second.
3. Press the MENU (OK) button.