User Manual

Audio recorder
90
Importing or exporting WAVE files
Importing
You can import a WAVE file into the audio recorder, and
play it or overdub onto it.
The following files can be imported.
• File format: WAVE format uncompressed linear PCM
• Sample bit depth: 16-bit
• Sampling frequency: 44.1 kHz or 48 kHz, stereo files?
Number of characters in file name: The first eight characters
are shown
Note: Since 44.1 kHz WAVE files will be converted into 48
kHz as they are imported into the KROSS, a small amount of
time may be required.
Import procedure
1. Using your computer, copy the WAVE file that you
want to import into the KORG/KROSS/DATA folder
of an SD card that was formatted by the KROSS.
2. Access the MEDIA> FILE page.
3. Select the WAVE file that you want to import.
4. Choose the Load Selected function to access the dialog
box.
5. If you want to rename the song, access the text dialog
box and enter a name.
6. If the volume of the file you’re importing should be
adjusted beforehand, specify Level Adjust.
Note: After importing, you can adjust the playback
volume of the audio recorder, or apply an individual
volume adjustment to each audio song. (see “Adjusting
the volume” on page 91)
7. Press the OK (MENU) button to execute the import
function.
The selected WAVE file will be loaded in KROSS audio
song format. The progress of execution is shown by a
progress bar in the display.
Note: This may take some time depending on the type of
file, etc.
During the import procedure, you can cancel by pressing
the ABORT (FUNCTION) button.
8. In the audio recorder setup window, select the song
that you imported, and play it.
Exporting a WAVE file
A multitrack-recorded audio song can be exported as a
WAVE file to the KORG/KROSS/DATA folder of the SD
card.
This lets you use your audio player to listen to an audio song
produced on the KROSS, or to load the song into your DAW.
• File format: WAVE format uncompressed linear PCM
• Sample bit depth: 16-bit
• Sampling frequency: 48 kHz
Number of characters in file name: The first eight characters
are shown
Export procedure
1. In the audio recorder setup window, select the audio
song that you want to export.
2. Choose the Export function to access the dialog box.
3. If you want to rename the file, access the text dialog
box and enter a name.
4. If you want to adjust the audio level of the song when
exporting it, specify Level Adjust.
5. Press the OK (MENU) button to execute the export
function.
The selected audio song will be exported as a WAVE file.
The progress of execution is shown by a progress bar in
the display.
The WAVE file will be created in the KORG/KROSS/
DATA folder of the SD card.
Note: This may take some time, depending on the length
of the song.
During the export procedure, you can cancel by pressing
the ABORT (FUNCTION) button.