User Manual

ManualsBrandsKorg ManualsMusical InstrumentsKross 2 61 Red Marble - WORKSTATION SYNTHESIZER 61 KEYS

Arpeggiator function

Changing the length of the arpeggiated notes

•Select [GATE] and adjust the value to change the length

of the arpeggiated notes.

Negative “–” values make the notes shorter, and positive

“+” values lengthen them. If this is 00, the note length

will be as specified by the program parameter Gate (P-

ARP> SETUP page).

Note: It is effective to adjust the Release on the PROG>

TONE page.

Changing the strength of the arpeggiated notes

•Select [VEL] (Velocity) and adjust the value to change

the strength of the arpeggiated notes.

Negative “–” values make the notes weaker, and positive

“+” values strengthen them. If this is 00, the strength of

the notes will be as specified by the program parameter

Velocity (P-ARP> SETUP page).

Note: It is effective to adjust Cutoff, Resonance, and EG

Intensity in the PROG> TONE page.

Giving a shuffle feel to the arpeggio pattern

•Select [SWING] and adjust the value to shift the timing

of even-numbered arpeggiated notes forward or

backward in time.

Negative “–” settings will make the even-numbered notes

earlier; positive “+” settings will make them later. If this

is at the center position (12 o’clock), the setting will be as

specified by the program parameter Swing (P-ARP>

SETUP page).

Note: Swing has no effect on the preset patterns.

Arpeggio pattern selection and

operation settings

In the PROG> ARP page you can select an arpeggio pattern

and specify how the arpeggiator will function.

1. Access the PROG> ARP page.

2. Use the cursor buttons ◄►▲▼ to select the

following parameters to edit.

3. Use the VALUE dial etc. to edit the value. Press the

ENTER button to switch the setting of the check box.

Selecting an arpeggio pattern

•In the Arpeggio Pattern Select area, select an arpeggio

pattern.

Preset: UP–Preset: Choose an arpeggio pattern from

RANDOM or 0000–1027.

With the factory settings, a variety of arpeggio patterns

are provided in the range 0000–0915.

Preset: UP

Preset: DOWN

Preset: ALT1

Preset: ALT2

Preset: RANDOM

Playing arpeggios across multiple octaves

•Use the Octave setting to specify the range of 1–4

octaves in which the arpeggio will be generated.

Changing the note value of the arpeggiated notes

• The Resolution parameter lets you set the note value of

the arpeggiated notes, over a range from  3 –  .

Arpeggiator control: [GATE], [VEL], [SWING]

Operation settings

Arpeggio Pattern Select

DOWN

ALT1

ALT2

RANDOM

Octave: 4