User Manual

Creating songs (Sequencer mode)
102
Other ways to record
Multi-track recording with KARMA and
the Drum Track
You can record multi-track performances generated by
KARMA and/or the Drum Track. For more information, see
“Using KARMA in Sequencer mode” on page 252.
Multi-track recording with RPPR
You can record multi-track performances generated by
RPPR. For more information, see “Using RPPR (Realtime
Pattern Play/Record)” on page 120.
Using the control surface to record
changes in the pan, EQ, volume, or Tone
Adjust parameters of a MIDI track
During realtime recording, you can use the control surface to
control the pan, EQ, volume, or Tone Adjust parameters, and
record these changes so that they will be reproduced during
playback.
If you will be adjusting more than one track simultaneously,
you’ll need to use multi-track recording.
Note: Changes you make using the control surface are
transmitted as control changes or system exclusive
messages. In order to record these changes, the Global P1:
MIDI– MIDI Enable Control Change and Enable
Exclusive items must be checked. Move to Global mode and
make sure that these items are checked.