User Manual
Table Of Contents
- About this manual
- Contents
- Introduction to KRONOS
- Front and rear panels
- Front panel
- 1. MAIN VOLUME knob
- 2. Control Surface
- 3. Data entry
- 4. DISK access indicator
- 5. MODE buttons
- 6. UTILITY buttons
- 7. BANK SELECT buttons
- 8. KARMA buttons
- 9. Vector Joystick
- 10. Drum Track
- 11. SW1 and SW2
- 12. Joystick
- 13. Ribbon controller
- 14. Headphone jack
- 15. EXIT button
- 16. SEQUENCER buttons
- 17. TEMPO controls
- 18. SAMPLING buttons
- 19. TouchView display
- Rear panel
- TouchView user interface
- Front panel
- Basic information
- Setup
- Update information
- Front and rear panels
- Playing and editing Programs
- Playing and editing Combinations
- Playing Combinations
- Easy Combination editing
- Detailed Combination editing
- Creating songs (Sequencer mode)
- Set Lists
- Sampling (Open Sampling System)
- Global Settings, Wave Seq., Drum Kits
- Loading & saving data, and creating CDs
- Using Effects
- Using KARMA
- Using the Drum Track
- Appendices
- Troubleshooting
- Error and confirmation messages
- A (ADC–Are You Sure)
- B (Buffer)
- C (Can’t calibrate–Completed)
- D (Destination–Disk)
- E (Error–Exceeded)
- F (File–Front)
- H
- I (Illegal–Index)
- K
- M (Master–Multisample)
- N (No data–Not enough song memory)
- O (Obey copyright rules–Oscillator)
- P (Pattern–Program)
- R (Rear sample–Root)
- S (Sample–Source)
- T (The clock–/TEMP folder detected)
- U (Unable to create directory–USB Hub)
- W (Wave)
- Y (You)
- Disk and Media information
- Specifications
- MIDI Implementation Chart
MIDI recording Recording the sound of a Combination or Program
89
Setup in Sequencer mode
(Copy From Combination and Copy From
Program)
In Sequencer mode, you can use the “Copy From Combi”
and “Copy From Program” page menu commands to set up a
Song based on a Combination or Program. In this example,
we’ll explain how to set up a song based on a combination.
Note: Make sure that the global MIDI channel (Global P1:
MIDI– MIDI page, MIDI Channel) is set to 01.
1. Select a new, empty song.
2. Select the page menu command “Copy From Combi.”
A dialog box will appear.
Select the program or combination that you want to copy
(i.e., the copy source).
We will copy the effect settings of the combination as
well, so check the IFXs-All, MFXs and TFXs check
boxes.
Check Multi REC Standby. The Status will be
automatically set to REC for the MIDI tracks needed to
record that combination.
Press the OK button to execute the copy.
Notice that when you execute this command, the
Play/Rec/Mute setting of each track will be set
automatically. The Multi REC check box will be
checked.
3. Begin recording.
Press the LOCATE switch to set the location to
001:01.000.
Press the SEQUENCER REC/WRITE switch, and then
press the SEQUENCER START/STOP switch.
Note: If you play the keyboard during the pre-count
before recording, KARMA and the Drum Track will start
playing the moment recording begins.
4. Record your performance.
5. When you are finished performing, press the
SEQUENCER START/STOP switch.
If you made a mistake or want to re-record, you can use
the Compare function (press the COMPARE switch) to
re-record as many times as you want. (The Multi REC
check box will be unchecked when you use Compare, so
you will need to check it again.)