User Manual

Playing and editing Programs
32
5. Press the OK button.
An “are you sure?” dialog appears.
6. If you’re certain of the change, press OK again.
The selected banks will now be initialized to use the new
Program types.
Selecting with the front-panel buttons
You can select Programs using the front-panel buttons,
without touching the screen. To do so:
1. Make sure that the front-panel PROG button is lit.
This means that you’re in Program mode, in which you can
select and edit Programs. If the button isn’t lit, press it now;
it will light up, and the main Program Play page will appear.
2. Go to the main Program Play page.
The main Play page shows an overview of the sound
structure, such as oscillators, filters, etc.
3. Make sure that the Program name is selected.
If it is not selected, go to the PROGRAM P0: Play page and
touch the Program’s name, so that it’s highlighted.
4. Use the VALUE controllers to select the program
number that you wish to play.
You can use the following methods to select a program.
• Turn the Value dial.
• Press the Inc or Dec buttons.
• Use the numeric keypad [0]–[9] to specify the number,
and press the ENTER key.
5. To select banks INT–A…G or USER–A…G, press and
release the corresponding BANK button.
For example, to select bank INT–B, press the I–B button in
the top row of Bank buttons. The I–B button will light, and
the name INT–B will appear in the upper left of the LCD
screen.
When you select a Bank, the button’s LED will light, and the
selected bank will appear on the upper left side of the LCD
screen.
6. To select banks USER–AA…GG, press and hold a
pair of I and U BANK buttons together.
For example, to select bank USER–CC, press and hold the I–
C button, and then press the U–C button. If you prefer, you
can also press them in the opposite order: first U–C, and then
I–C.
Selecting by bank and number
You can select Programs from a list organized by Program
bank.
1. Press the Program Select popup button.
The Bank/Program Select dialog appears.
Bank/Program Select menu
In this illustration, bank INT–A is selected. The list on the
right shows the Programs contained in that bank.
2. Press the tabs on the left side of the display to select a
bank.
There are more banks than can be shown at one time, so the
banks are divided into two groups of tabs: INT–A…USER–
G and USER–AA…USER–GG.
3. If necessary, use the “More…” buttons below the tabs
to switch between showing the tabs for INT–
A…USER–G and USER–AA…USER–GG.
4. Press one of the Program names in the list to select a
Program.
The selected Program will be highlighted, and the keyboard
will immediately switch to the new sound.
5. If you like, play a few notes to hear the new Program.
You can play the new Program while the menu is still
showing, without needing to press OK.
6. When you are satisfied with the selected Program,
press the OK button to close the popup menu.
If you press the Cancel button, the selection you made here
will be discarded, and you will return to the program that had
been selected before you opened the menu.