User Manual

Error and confirmation messages W (Wave)
287
USB HUB Power exceeded
Please disconnect USB device
Meaning: The power consumption of your USB devices has
exceeded the capacity of the hub to which they are
connected. The USB hub will not be recognized correctly in
this state. To solve this problem:
• If you’re using a USB hub or device that is capable of
being self-powered, use it in self-powered mode.
• If you are using more than one USB hub, try connecting
the device to a different USB hub.
W (Wave)
.WAV already exists. Overwrite?
Meaning: When importing a WAVE file that requires
conversion to 48kHz/mono, a file of the same name already
exists on the disk. To solve this problem:
• Either delete the existing file, or rename it before
importing.
WAVE files on this external medium will
not be played with sequencer audio track
playback. Copy SNG and WAVE Directory
to Internal HDD, and load SNG from
internal HDD
Meaning: The WAVE file used by the SNG data you’re
loading in Disk mode exists on external media, and will not
play back correctly when loaded. Audio track recording and
playback is available only on the internal disk. To solve this
problem:
• Copy the .SNG file and the directory for that .SNG file
(the directory containing the WAVE files it uses) to the
same directory of the internal disk, and then load the data
again.
WAVE file size over limit
Meaning: When editing an audio track in Sequencer mode,
you exceeded the maximum number of 230,400,000 samples
(80 minutes at a sample rate of 48 kHz, 16-bit) allowable in a
WAVE fil e.
Y (You)
You can’t undo this operation
Are you sure?
Meaning: Once you enter event editing (even if you leave
event editing without actually editing an event), it will no
longer be possible to execute a Compare of the previous edit.
If you wish to enter event editing, press the OK button. To
cancel, press the Cancel button.
You can’t undo last operation
Are you sure?
Meaning: When you exit recording or event editing in
Sequencer mode, the memory area for Undo (Compare
function) is not allocated. If you wish to keep the data that
was just recorded or edited, press the OK button. If you wish
to return to the previous data (i.e., to delete the data that was
just recorded or edited), press the Cancel button.
Meaning: When editing in Sequencer mode, memory area
for Undo (Compare function) cannot be allocated. If you
wish to execute the edit, press the OK button. (It will not be
possible to return to the state before editing.) If you decide
not to execute the edit, press the Cancel button.
• In order to allocate memory area for Undo (Compare
function), delete unneeded data such as songs, tracks, or
patterns. We recommend that you save data to media
before you execute the edit operation.