User Manual

Appendices
280
File/path not found
Meaning: When loading a sample file in Disk mode,
executing the Delete command, or selecting a disk or
directory in a dialog box, the specified file name does not
exist.
Or, when executing the Copy command in the Disk mode
Utility page, and you used a wildcard to specify the copy file
name, the specified file was not found.
Meaning: In Disk mode when you used the Open button to
open a directory, the path length including the selected
directory name exceeded 76 characters.
Or, when using the Copy command in Disk mode, the length
of the copy source path exceeded 76 characters.
• Rename the file and/or directories using shorter names,
so that the file path fits within 76 characters. The file
path includes the file name and the names of all parent
directories up to the root level of the disk.
Meaning: When executing Insert in the Disk mode Make
Audio CD page, you attempted to use the Insert All button to
add a WAVE file, but no WAVE file with a sampling
frequency of 44.1 kHz or 48 kHz exists in the selected
directory.
• Check the file or directory.
Meaning: In Disk mode when loading a .KCD file, a WAVE
file listed in the Audio Track List could not be found.
• Look at the file sizes on the Make Audio CD page. If a
file’s size is not shown, it could not be found on the disk.
Check the file or directory, or delete it from the Audio
Track List.
Front sample data used in rear sample
Can’t overwrite
Meaning: When executing Link in the Sampling mode
Sample Edit page, the sample data of the front sample is also
being used by the rear sample, and therefore cannot be
overwritten. To solve this problem:
• Instead of using Overwrite, specify a different sample as
the save-destination.
H
HD Protected
Meaning: The internal SSD is protected. To solve this
problem:
• On the Global-Basic tab, under Memory Protect, turn off
(un-check) the Internal HDD Save check box.
I (Illegal–Index)
Illegal file description
Meaning: The filename that you specified when saving a
file or creating a directory contained invalid characters. To
solve this problem:
• Change the filename you are specifying. Filenames not
permitted by MS-DOS cannot be used as a filename.
Illegal SMF data
Meaning: You attempted to load a file that was not a
Standard MIDI File.
Illegal SMF division
Meaning: You attempted to load a Standard MIDI File that
was timecode-based.
Illegal SMF format
Meaning: You attempted to load a Standard MIDI File of a
format other than 0 or 1.
Inconvertible file exists
Meaning: A file that cannot be used with ISO9660 format
exists on the media. To solve this problem:
• Media that was formatted or written by a device other
than the KRONOS may be impossible for the KRONOS
to convert into ISO9660 format. To perform the
conversion, use the packet writing software that was used
to format or write the media.
Index number over limit
Meaning: When sampling into RAM in Combination,
Program, or Sequencer mode, there are too many indexes to
be simultaneously converted into a multisample.
• Either convert the samples into a different program or
multisample, or use Sampling mode to delete some of the
indexes before you continue sampling.