User Manual

Global Settings Global audio settings
179
Global audio settings
Making default audio input settings
The Global Audio Input page controls the default mixer
settings for the audio inputs, including level, pan, effects
busing, and so on. It also lets you route the main L/R outputs
to a pair of individual outputs, for specific applications in
live performance and recording.
Each Program, Combination, and Song can either use these
Global audio input mixer settings, or have its own custom
settings. This is controlled by the Use Global Setting
parameter, on the Program, Combination, or Song’s Audio
Input/Sampling page.
The default for Use Global Setting is On (checked). This
lets you change freely between different Programs, Combis,
and Songs without affecting the audio inputs.
Also, any edits made in the mode’s Audio Input/Sampling
page will affect the Global setting, and vice-versa.
On the other hand, it may sometimes be convenient to save a
particular mixer setup with an individual Program, Combi,
or Song, to set up special sub-mixer settings or effects
processing for particular inputs. For example, you can set up
a Program to use a mic input with a vocoder, as described
under “Vocoder (Program mode)” on page 875 of the
Parameter Guide.
In this case, set the Program, Combi, or Song’s Use Global
Setting to Off (un-checked), and the audio inputs will use
the custom settings.
With this in mind, the Global settings apply in the following
situations:
• When this page (Global Audio Input) is open.
• In Program, Combination, and Sequencer modes, if the
Audio Input/Sampling page’s Use Global Setting check-
box is On (checked). This can be set independently for
each Program, Combination, and Song.
• In other pages of Global mode, if you switch to Global
mode from a Program, Combi, or Song with Use Global
Setting set to On (checked).
• Similarly, in Disk mode, if you switch to Disk mode
from a Program, Combi, or Song with Use Global
Setting set to On (checked).