User Manual

Editing Set Lists Detailed Set List editing
133
Set List Slot Volume
Transposing individual Slots
You can adjust transposition separately for each Slot. For
instance, you might decide to transpose a song down by a
few half-steps to accommodate a singer. To do so:
1. Adjust the Transpose parameter.
This sets the transposition of the current slot, in semitones.
For instance, -12 is displayed as  12.If Transpose is set to
+0, nothing is shown.
Drums not affected by Slot Transpose
Slot Transpose is designed so that, in general, it doesn’t
affect un-pitched drum sounds unless they’re being played
directly from the keyboard.
If the Slot contains a Program, its Drum Track Program is
not affected by Transpose.
Similarly, if the Slot contains a Combination or Song, drums
played by the Drum Track or generated as part of KARMA
rhythms are generally excluded from Transposition. To
achieve this, Timbres or Tracks are not affected by
Transpose if both of the following are true:
• When the timbre's MIDI channel is set to something
other than the global channel (COMBI).
• When the track's MIDI channel is different than the
channel of the Track Select track.
• The Program’s Category is “Drums,” except for the sub-
category “Pitched” (used for timpani, for instance).
Entering comments
Each Slot can have a comment of up to 512 characters, for
lyrics, performance notes, and so on. To edit the comments:
1. Press the Edit Comment button to bring up the text
edit dialog box.
The comment edit dialog box has a few added features in
comparison to the standard text editor:
• Text is displayed using the Slot’s selected font.
• Use touch-drag to select text.
• Use the LF button to insert line feeds (aka “returns”).
• Multiple cut/copy clipboards are supported; see below
for details.
If a USB QWERTY keyboard is connected, you can use this
to enter text instead of the on-screen keyboard. For more
information, see “Editing names and entering text” on
page 201.
2. Enter the comment as desired, and then press OK.
You can read the entire comment, even with multiple lines,
on the Set List Play page.
Multiple clipboards in the Comment editor
After copying or cutting text in the Comment editor, press
the Clipboard button to show the current contents of the
clipboards. Each clipboard is represented by a button with an
abbreviation of the text it contains. 10 clipboards can be
retained at once. If an eleventh section of text is copied, the
oldest clipboard is discarded.
Touch the buttons to paste the text into the comment. (The
separate Paste button always pastes the most recent
clipboard.) To remove a clipboard, enable its Remove
checkbox and then press the Remove button.
Setting the Slot’s color
You can assign each Slot to one of 16 different colors, to
make it easier to distinguish between them quickly. You can
also apply a color to a range of Slots at once. To do so:
1. Press the Color button to bring up the color selection
dialog box.
2. Choose a color for the Slot.
If you like, you can also select a range of Slots, and apply a
color to all of them at once.
3. When you’re done, press OK.
Legacy Slot Style
If you prefer the graphical appearance of Set Lists prior to
KRONOS software version 3.0, you can enable the Legacy
Slot Style option in the menu. This removes the bold outline
from the selected Slot (coloring it bright orange instead), and
uses the same gray color for all other Slots, ignoring the Slot
Color settings.
TFX 2
& EQ
Set List Slot Volume
Front Panel
Analog Volume
Knob
Universal Exclusive
Master Volume
(Fom Knobs, Pedals,
MIDI, or Sequencer)
Headphone
& Main L/R
Outputs
S/PDIF
Output
Program,
Combination,
or Song
Master Volume