User's Manual
Table Of Contents
- Table of Contents
- Introduction
- Quick Start
- Turning the power on/off
- Listening to the demo songs
- Selecting and playing a program
- Selecting and playing a combination
- Using controllers to modify the sound
- Using the arpeggiator while you play
- Playing with the RPPR (Realtime Pattern Play/Recording) function
- Simple program editing
- Simple combination editing
- Sampling (recording a sample)
- Basic functions
- Saving data
- Restoring the factory settings
- Program mode
- How a program is organized
- Basic program editing
- Oscillator settings 2.1: Ed–Basic
- Controller settings 2.2: Ed–Ctrl
- Pitch settings 3.1: Ed–Pitch
- Filter settings 4.1: Ed–Filter1, 4.2: Ed–Filter2
- Amplifier settings 5.1: Ed–Amp1, 5.2: Ed–Amp2
- LFO settings 5.3: Ed–LFOs
- Arpeggiator settings 6.1: Ed–Arp.
- BUS settings 7.1: Ed–InsertFX BUS
- Insert Effect settings 7.1: Ed–InsertFX Setup, IFX
- Master Effect settings 7.2: Ed–MasterFX
- More about Alternate Modulation
- Auto Song Setup function
- Combination mode
- How a combination is organized
- Basic combination editing
- Timbre 1–8 program, pan and volume 2.1: Ed–Prog/Mix
- Controller settings 2.2: Ed–Ctrl
- Settings for status, MIDI channel, and playing mode 3.1: Ed–Param1
- Note timing and scale settings 3.2: Ed–Param2
- Layer and split settings 3.3: Ed–Key Zone
- Velocity switch settings 3.4: Ed–Vel Zone
- MIDI filter settings 4.1: Ed–MIDI Filter1–4.4: Ed–MIDI Filter4
- Arpeggiator settings 6.1: Ed–Arp.
- Bus settings 7.1: Ed–InsertFX BUS
- Insert Effect settings 7.1: Ed–InsertFX Setup, IFX
- Master Effect settings 7.2: Ed–MasterFX
- Auto Song Setup function
- How a combination is organized
- Sequencer mode
- Sampling mode
- Global mode
- Media mode
- Arpeggiator settings
- Effects settings
- Other functions
- Tuning to another instrument/ Transposing
- Bypassing the effects
- Specifying the function of the Assignable Switch and Assignable Pedal
- Selecting different Velocity and Aftertouch curves
- Creating original scales
- Changing the scale
- Setting the function of [SW1] and [SW2]
- Setting the B-mode functions of REALTIME CONTROLS [1]–[4]
- Adjusting the contrast (brightness) of the LCD screen
- Using this instrument as a data filer
- Tap tempo control
- Shortcuts
- Appendices
19
Quick Start
Listening to the demo songs
Listening to the demo songs
Loading demo playback data
The TR contains demo songs (and preloaded data).
This data can be loaded in Global mode.
1 Press the [GLOBAL] key (the key will light).
You will enter Global mode.
Verify that the GLOBAL 1.1: System page is dis-
played. If it is not displayed, press the [EXIT] key.
2 Press the [F8] (“UTILITY”) key to access the Utility
menu.
3 Press the [F7] (“ ”) key to select “Load Pre-
load/Demo Data,” and press the [F8] (“OK”) key.
A dialog box will appear.
4 Use the [INC]/[DEC] keys to select the data that
you want to load.
In the “Kind” field, select the data that you want to
load.
In this case, select All (Preload PCG and Demo
Songs). When you execute the Load operation, the
demo song data and preloaded data will be loaded.
5 Press the [F8] (“OK”) key.
A dialog box will ask you for confirmation.
6 Press the [F8] (“OK”) key once again.
The preloaded data and demo song data will be
loaded.
Never turn off the power while the data is being
loaded.
If the Memory Protected dialog box appears, un-
check the memory protect setting, and perform the
Load operation again. (
☞p.43)
From the powered-off state, if you turn on the
power while holding down the [MENU] key and
[EXIT] key, the Load All (Preload PCG and Demo
Songs) operation will be executed automatically.
(The LCD screen will show a message of “Now
Writing Internal Memory.”) This will load all PCG
data and demo song data. Never turn off the
power while the data is being loaded.
Selecting and playing a demo
song in the Sequencer mode
1 Press the [SEQ] key (the key will light).
You will enter Sequencer mode.
2 Access the SEQ 1.1: Play/REC, Play/REC page.
If the SEQ 1.1: Play/REC, Play/REC page does not
appear, select it as follows.
1) Press the [MENU] key.
The LCD screen will show a list of the pages in
Sequencer mode.
2) Press the [F1] key to select “P/R,” and press the
[F8] (“OPEN”) key.
3) Press the [F1] key. The SEQ 1.1: Play/REC, Play/
REC page will be displayed.
3 Use the cursor keys [ ], [ ] to choose “Song
Select.”
The song name will be highlighted.
4 Use the [INC]/[DEC] keys or other VALUE control-
lers to select the demo song that you wish to play.
5 Press the [START/STOP] key.
The key will blink and the selected song will play.
6 If you wish to stop playback, press the [START/
STOP] key once again.
SEQ 1.1:
Play/REC
Play/REC page
Song Select