User's Manual
Table Of Contents
- Table of Contents
- Introduction
- Quick Start
- Turning the power on/off
- Listening to the demo songs
- Selecting and playing a program
- Selecting and playing a combination
- Using controllers to modify the sound
- Using the arpeggiator while you play
- Playing with the RPPR (Realtime Pattern Play/Recording) function
- Simple program editing
- Simple combination editing
- Sampling (recording a sample)
- Basic functions
- Saving data
- Restoring the factory settings
- Program mode
- How a program is organized
- Basic program editing
- Oscillator settings 2.1: Ed–Basic
- Controller settings 2.2: Ed–Ctrl
- Pitch settings 3.1: Ed–Pitch
- Filter settings 4.1: Ed–Filter1, 4.2: Ed–Filter2
- Amplifier settings 5.1: Ed–Amp1, 5.2: Ed–Amp2
- LFO settings 5.3: Ed–LFOs
- Arpeggiator settings 6.1: Ed–Arp.
- BUS settings 7.1: Ed–InsertFX BUS
- Insert Effect settings 7.1: Ed–InsertFX Setup, IFX
- Master Effect settings 7.2: Ed–MasterFX
- More about Alternate Modulation
- Auto Song Setup function
- Combination mode
- How a combination is organized
- Basic combination editing
- Timbre 1–8 program, pan and volume 2.1: Ed–Prog/Mix
- Controller settings 2.2: Ed–Ctrl
- Settings for status, MIDI channel, and playing mode 3.1: Ed–Param1
- Note timing and scale settings 3.2: Ed–Param2
- Layer and split settings 3.3: Ed–Key Zone
- Velocity switch settings 3.4: Ed–Vel Zone
- MIDI filter settings 4.1: Ed–MIDI Filter1–4.4: Ed–MIDI Filter4
- Arpeggiator settings 6.1: Ed–Arp.
- Bus settings 7.1: Ed–InsertFX BUS
- Insert Effect settings 7.1: Ed–InsertFX Setup, IFX
- Master Effect settings 7.2: Ed–MasterFX
- Auto Song Setup function
- How a combination is organized
- Sequencer mode
- Sampling mode
- Global mode
- Media mode
- Arpeggiator settings
- Effects settings
- Other functions
- Tuning to another instrument/ Transposing
- Bypassing the effects
- Specifying the function of the Assignable Switch and Assignable Pedal
- Selecting different Velocity and Aftertouch curves
- Creating original scales
- Changing the scale
- Setting the function of [SW1] and [SW2]
- Setting the B-mode functions of REALTIME CONTROLS [1]–[4]
- Adjusting the contrast (brightness) of the LCD screen
- Using this instrument as a data filer
- Tap tempo control
- Shortcuts
- Appendices
126
MIDI Implementation Chart
MIDI Implementation Chart
Date : 2005. 08. 12
Basic
Channel
Default
Changed
Aftertouch
Pitch Bend
Polyphonic (Key)
Monophonic (Channel)
Program
Change
Variable Range
System
Real Time
Clock
Command
System Exclusive
System
Common
Song Position
Song Select
Tune
Mode 1: OMNI ON, POLY Mode 2: OMNI ON, MONO : Yes
Mode 3: OMNI OFF, POLY Mode 4: OMNI OFF, MONO : No
Aux
Messages
Local On/Off
All Notes Off
Active Sense
Reset
Velocity
Note On
Note Off
Note
Number:
True Voice
Mode
Memorized
Messages
Altered
0 – 127
9n, V=0 – 127
0 – 127
0 – 127
1 – 16
1 – 16
0 – 127
0 – 127
9n, V=0 – 127
0 – 127
0 – 127
123 – 127
Memorized
3
[62 notes Music Workstation/Sampler]
Sequencer and Arpeggiator data
can transmit all note numbers 0–127
Polyphonic aftertouch transmitted
*A
only as sequence data
*A
When cue list is selected, corresponds to cue list
*1
When cue list is selected, corresponds to cue lists 0–19
*1
*1
*1
Notes
*P, *A, *C, *E: Transmitted/received when GLOBAL 2.1: MIDI Filter (Program Change, After Touch, Control Change, Exclusive) is Enable, respectively.
*1: When GLOBAL 2.1: MIDI Clock is Internal, transmitted but not received. The opposite for External or Ext-USB.
*2: LSB,MSB=02,00: Arpeggiator ON/OFF, 0A,00: Arpeggiator Gate control, 0B,00: Arpeggiator Velocity control
*3: LSB,MSB=00,00: Pitch bend range, 01,00: Fine tune, 02,00: Coarse tune
*4: In addition to Korg exclusive messages, Inquiry, GM System On, Master Volume, Master Balance, Master Fine Tune,
and Master Coarse Tune are supported.
Bank Select (MSB, LSB) *P
Joystick (+Y, –Y)
*C
Pedal, Portamento Time, Volume, IFX pan, Pan
*C
Expression, Effect Control 1/2 *C
Damper, Portamento Sw., Sostenuto, Soft
*C
Sound (Realtime Controls 1–4A: 74, 71, 79, 72)
*C
Switch 1, 2, Foot Switch, Controller
*C
Send 1, 2, Effect ON/OFF (IFX, MFX1, MFX2)
*C
Data Entry (MSB, LSB) *C
Data Increment, Decrement *C
NRPN (LSB, MSB) *C, *2
RPN (LSB, MSB) *C, *3
Realtime Controls knobs 1–4 B-assign
*C
Sequencer data (receive *C)
All Sound Off, Reset All Controllers
*C
Control
Change
0, 32
1, 2
4, 5, 7, 8, 10
11, 12, 13
64, 65, 66, 67
70 – 79
80, 81, 82, 83
93, 91, 92, 94, 95
6, 38
96, 97
98, 99
100, 101
0 – 95
0 – 101
120, 121
1 – 16
1 – 16
Function Transmitted Recognized Remarks
*C
*P
*
E*4
0 – 127
Consult your local Korg distributor for more information on MIDI IMPLEMENTATION.