User's Manual
Table Of Contents
- Table of Contents
- Introduction
- Quick Start
- Turning the power on/off
- Listening to the demo songs
- Selecting and playing a program
- Selecting and playing a combination
- Using controllers to modify the sound
- Using the arpeggiator while you play
- Playing with the RPPR (Realtime Pattern Play/Recording) function
- Simple program editing
- Simple combination editing
- Sampling (recording a sample)
- Basic functions
- Saving data
- Restoring the factory settings
- Program mode
- How a program is organized
- Basic program editing
- Oscillator settings 2.1: Ed–Basic
- Controller settings 2.2: Ed–Ctrl
- Pitch settings 3.1: Ed–Pitch
- Filter settings 4.1: Ed–Filter1, 4.2: Ed–Filter2
- Amplifier settings 5.1: Ed–Amp1, 5.2: Ed–Amp2
- LFO settings 5.3: Ed–LFOs
- Arpeggiator settings 6.1: Ed–Arp.
- BUS settings 7.1: Ed–InsertFX BUS
- Insert Effect settings 7.1: Ed–InsertFX Setup, IFX
- Master Effect settings 7.2: Ed–MasterFX
- More about Alternate Modulation
- Auto Song Setup function
- Combination mode
- How a combination is organized
- Basic combination editing
- Timbre 1–8 program, pan and volume 2.1: Ed–Prog/Mix
- Controller settings 2.2: Ed–Ctrl
- Settings for status, MIDI channel, and playing mode 3.1: Ed–Param1
- Note timing and scale settings 3.2: Ed–Param2
- Layer and split settings 3.3: Ed–Key Zone
- Velocity switch settings 3.4: Ed–Vel Zone
- MIDI filter settings 4.1: Ed–MIDI Filter1–4.4: Ed–MIDI Filter4
- Arpeggiator settings 6.1: Ed–Arp.
- Bus settings 7.1: Ed–InsertFX BUS
- Insert Effect settings 7.1: Ed–InsertFX Setup, IFX
- Master Effect settings 7.2: Ed–MasterFX
- Auto Song Setup function
- How a combination is organized
- Sequencer mode
- Sampling mode
- Global mode
- Media mode
- Arpeggiator settings
- Effects settings
- Other functions
- Tuning to another instrument/ Transposing
- Bypassing the effects
- Specifying the function of the Assignable Switch and Assignable Pedal
- Selecting different Velocity and Aftertouch curves
- Creating original scales
- Changing the scale
- Setting the function of [SW1] and [SW2]
- Setting the B-mode functions of REALTIME CONTROLS [1]–[4]
- Adjusting the contrast (brightness) of the LCD screen
- Using this instrument as a data filer
- Tap tempo control
- Shortcuts
- Appendices
125
Appendices
Specifications and options
Audio outputs
1/4" AUDIO OUTPUT (MAIN) L/MONO, R:
1/4" AUDIO OUTPUT (INDIVIDUAL) 1, 2
1/4" AUDIO OUTPUT HEADPHONE
Audio inputs (if the separately sold EXB-SMPL option is
installed)
AUDIO INPUT 1, 2
LEVEL [MIC/LINE] switch, [LEVEL] knob
Input impedance: 10 [kΩ]
Nominal level
Maximum level
Source impedance: 600 [Ω]
Control inputs
DAMPER (half-damper supported), ASSIGNABLE
SWITCH/PEDAL
MIDI
MIDI IN, OUT, THRU, USB B connector
SD card slot
Usable media: 2.7–3.6 V (16 MB - 1 GB)
Other
AC power inlet, switch
Support for options
EXB-SMPL (one 16Mbyte 72-pin SIMM is included)
72-pin SIMM memory slots x 2 (for sample data RAM)
Dimensions (W × D × H)
61-key model: 1045 × 302 × 95 (mm)
76-key model: 1257 × 302 × 95 (mm)
88-key model: 1414 × 365 × 123 (mm)
Weight
61-key model: 7.8kg
76-key model: 9.2kg
88-key model: 24.1kg
Power consumption:
13W (if the EXB-SMPL option and two 32Mbyte SIMM
are installed)
Included items:
CD-ROM (KORG USB-MIDI driver, Voice Name List)
AC/AC power supply 9VAC 3.0A
Operating requirements for con-
nection to a computer
Windows
Operating system
Microsoft Windows XP Home Edition/Professional
Computer
A computer with USB connector that meets the above
requirements
Macintosh
Operating system
Mac OS X 10.2 or later
Computer
An Apple Macintosh with USB connector that meets
the requirements for the above operating system
Options
Expansion board
EXB-SMPL Sampling upgrade
Expression/volume pedal:
XVP-10 EXP/VOL pedal
Foot controller:
EXP-2
Damper pedal:
DS-1H
Pedal switch:
PS-1
Other:
MIDI cable
* Appearance and specifications of this product are subject to
change without notice. (Aug/05)
Output impedance 1.1 [kΩ]
(L/MONO is 550 [Ω] for mono)
Maximum output level
L/MONO, R: +12.0 [dBu]
(INDIVIDUAL)1.2: +11.6 [dBu]
Load impedance 100 [kΩ] or greater
Output impedance 33 [Ω]
Maximum output level 36 [mW]
Load impedance 33 [Ω]
LINE +3 [dBu] @ [INPUT] knob= min.
–30 [dBu] @ [INPUT] knob= max.
MIC –18 [dBu] @ [INPUT] knob= min.
–53 [dBu] @ [INPUT] knob= max.
LINE +13 [dBu] @ [INPUT] knob = min.
–20 [dBu] @ [INPUT] knob= max.
MIC –8 [dBu] @ [INPUT] knob= min.
–43 [dBu] @ [INPUT] knob= max.