Datasheet

254
A Beijer Electronics Group Companywww.korenix.com
Link Aggregation Control Protocol allows users grouping
multiple Ethernet ports in parallel to increase the link
bandwidth. The aggregated ports can be viewed as
one physical port, so that the bandwidth is higher than
just one single Ethernet port. The member ports of the
same trunk group can balance the loading and backup
with each other. The LACP feature is usually used when
higher bandwidth is needed for the backbone network.
This is a cost-effective way for transferring much more
data. If the trunk port is also assigned as a ring port, it
will become a TrunkRing, which means the bandwidth of
ring path has increased with port trunk technology.
Now, there is no recovery time when failure occurred.
The JetNet 4508 V2 provides a simple and easy way to
aggregate port bandwidth into Rapid Super Ring.
The Precision Time Protocol is designed to
synchronize time across Ethernet networks. It
allows synchronization of distributed clocks to sub-
microsecond accuracy for devices that may have
differing precision, resolution and stability. JetNet
4508 V2 supports Auto (or bindery clock), Master
and Slave modes for time synchronization to achieve
a high level of synchronization within an industrial
motion-control environment with a minimum use of
network and computing resources. The protocol helps for
sequencing event measurements, scheduling outputs,
synchronizing actuation, time-stamping, coordinating
event records, etc.
Link Aggregation Control Protocol
IEEE 1588 Precision Time Protocol (PTP)
Port Aggregation (Trunk)