User's Manual

TROUBLESHOOTING

INTRODUCTION

• Connect the LCD Monitor to another computer.

• Check the graphics card for proper sync scheme(or sync

polarities) to match the LCD Monitor’s specifications

◆ Double (split) screen image.

• Make sure your graphics card is set to Non-Interlaced mode.

◆ Entire screen image rolls (scrolls) vertically.

• Make sure the input signals are within the LCD monitor’s specified

frequency range.

(Maximum:VESA, MAC1280×102475Hz)

• Connect the video cable securely.

• Try the this Monitor with another power source.

◆ Control buttons do not work.

• Press only one button at a time.

◆ No Sound

• Make Sure the audio cable is properly connected between this monitor

and your system.

• Check the audio volume of this monitor and your system.

ABOUT THE LCD

The LCD contains over 2,359,296 thin-film transistors(TFTs).

A small number of missing, discolored, or lighted dots on the screen is an

Intrinsic characteristic of TFT LCD technology and is not an LCD defect.

If you display a fixed pattern for more than 10hours, its image may remain on

The screen in overlap mode when you display something else.