User's Manual

CONTROL BUTTONS

GETTING STARTED

OSD Buttons : The OSD control keys are located on lower left of the

Monitor.

(Enter)

a. No OSD : This buttons will enable the main OSD menu.

b. Main OSD menu : Press this button to enter to the selected OSD

control menu.

c. Control OSD menu : Swap the control item.

▲ or ▼(Up/Down) : Use these buttons to increase or decrease each value.

a. No OSD :

- ▲ : Contrast & Brightness control menu will be shown. Press ‘‘

(Enter)to switch to another menu between Contrast and

Brightness.

- ▼ : Audio volume control menu will be shown.

b. Main OSD menu : Use these button to move up(or down)the OSD

selection menu and adjust the attribute of the monitor while in OSD

mode.

A (Auto)

a. No OSD : This button can be used to ‘Auto Adjustment’ function.

(H,V-position, Size, Phase)

b. Main OSD menu : Press this button to exit from the main OSD menu.

c. Control OSD Menu : Return to the previous menu.

I (Select) : This button is not available when OSD menu is displayed.

a. No OSD :

- Pressing this button for 2 seconds out of OSD menu allows you to

select the text mode or movie mode.

- Pressing this button shortly out of OSD menu allows you to change

the video input signal either either D-SUB(Analog) or DVI(TMDS).