User's Manual

INTRODUCTION
INTRODUCTION
EQUIPMENT CHECK LIST
INTRODUCTION
INTRODUCTION
Before operating your display, please check to make sure that all of the
items listed are present in your package:
Accessory Box
Power Requirements
The monitor is equipped with an auto-sensing power supply for voltage
ranging from 100-120VAC/200-240VAC, 50/60Hz.
Confirm the power rating of the AC Source before you plug the AC
cable to the wall outlet.
* Supports Analog and Digital(DVI-D) IBM compatible PC, Apple
MacintoshTM(Adapter optional)
* Supports DPMS for monitor power management
* Support DDC2B
* On Screen Control : Auto-Tune, Contrast, Brightness, H/V Position, H-Size,
Phase, Auto-Level, Color Control, Input Select, Volume, Mute, OSD,Position
OSD Time-out, Language, Information.
* Built-in color active matrix TFT (Thin Film Transistor) Liquid Crystal Display
(LCD) that uses amorphous silicon TFTs as a switching device.
* Built-in 3.1CH Audio Amp.,and Speaker : 3W + 3W + 3W at 1kHz
* Contrast Ratio : 350:1
* Luninance of White : 260cd/m
2
* Resolution : up to 1280 x 1024
* Color : 16.7M Color support.
* Pixel pitch : 0.264mm(H) x 0.264mm(W)
* Scanning frequency : 30kHz ~ 80kHz(H), 55Hz ~ 75Hz(V).
* Universal power supply : AC 100 - 240V allowed.
* Power consumption Normal : 50 Watt Max. Off : 3 Watt Max.
* Outside dimension : 375(W) x 377.9(H) x 25(D)
* Weight (net) : 4.8kg
2 3
AC to DC Adapter
Power Cord
Audio In Cable
Signal Cable(DVI-D)Signal Cable(D-SUB)
LCD Monitor
Manual
MONITOR FEATURES