User's Manual

TIMING GUIDE

REFERENCE

The LCD is a multi-frequency display. It operates at horizontal

frequencies between 30KHz-80KHz and vertical frequencies between

55Hz-75Hz. Because of its microprocessor-based design, it offers auto-

synchronization and auto-sizing capabilities. This monitor offers 10pre-

programmed settings that are listed in the following time table.

These preset modes cover most of the common video modes supported

by popular graphics adapters. However, each adapter’s implementation

of these video modes may vary slightly. If you find it necessary to make

minor display adjustments(for example, horizontal and vertical position),

please refer to the On Screen Display section of this manual for

instructions.

If you would like to use one of the preset timing modes, please refer to

your video card manufacturer’s installation guide for instructions on how

to make these changes. The video card controls the refresh rate. Most

Video cards provide a software utility or hardware DIP switches that

allows you to change the frequency used for each resolution.

Note;

* If you use a Macintosh

, you may need a Mac adapter.