User's Manual

CONTROL BUTTONS
GETTING STARTED
OSD Buttons : The OSD control keys are located on lower left of the
Monitor.
MENU(Enter)
a. No OSD : This buttons will enable the main OSD menu.
b. Main OSD menu : Press this button to enter to the selected OSD
control menu.
c. Control OSD menu : Swap the control item.
▲ or ▼(Up/Down) : Use these buttons to increase or decrease each value.
a. No OSD :
- ▲ : Contrast & Brightness control menu will be shown.
Press ‘MENU‘ to switch to another menu between Contrast and
Brightness.
- ▼ : Audio volume control menu will be shown.=>(KL1722AM,BM)
b. Main OSD menu : Use these button to move up(or down)the OSD
selection menu and adjust the attribute of the monitor while in OSD
mode.
AUTO(Auto)
a. No OSD :
- Pressing this button for 3 seconds out of OSD menu allows you to change
the video input signal either either D-SUB(Analog) or DVI(TMDS).
=>(KL1722B,BM)
- Pressing this button shortly out of OSD menu allows you to do
‘Auto-Tune’ function.(H,V-position, Size, Phase)
b. Main OSD menu : Press this button to exit from the main OSD menu.
c. Control OSD Menu : Return to the previous menu.
5